Acer S1213Hn User Manual page 36

26
Administrator Password
You can enter "Administrator Password" when the "Enter
Administrator Password" or "Enter Password" dialogue box
displays.
•
•
If you forget your administrator password, do the following
to retrieve the administrator password:
•
•
Selecting "On" enables the function. The projector can output
a VGA signal when it is in standby mode and the VGA IN (or
VGA IN 1) and VGA OUT sockets are correctly connected to the
VGA OUT
devices.
(Standby)
Press
Reset
parameters on all menus to the factory default settings.
Press to change "Administrator Password".
The factory default of "Administrator Password" is
"1234".
Enter the unique 6-digit "Universal Password" which is
printed on the Security Card that came with your
projector. This unique password will be accepted by the
projector no matter what the administrator password is.
If the Security Card is lost, please contact your local Acer
service center.
Enabling this function slightly increases the standby
power consumption.
after choosing "Yes" to return the display