Casio XJ-A245V User Manual page 19

To connect a memory card to the Data Projector
1.
Connect a USB card reader that supports the memory card you are using to the
Data Projector's USB port.
2.
Load the memory card into the USB card reader's card slot.
 For details about how to load a memory card into the USB card reader, see the user
documentation that comes with the reader.
To connect a digital camera to the Data Projector
1.
If necessary, configure the digital camera's USB mass storage class setting.
2.
Turn off the digital camera and connect a USB cable to it.
3.
Connect the other end of the USB cable (Type A connector) to the Data
Projector's USB port.
4.
Turn on the digital camera.
Note
For details about steps 1, 2, and 4, see the user documentation that comes with your digital
camera.
19