Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Electro-Voice EVC-1082-96
Summarization of Contents
Safety
1.1 Important safety instructions
Crucial instructions for safe operation and handling of loudspeakers.
1.2 Suspension
Warnings and guidelines for safe suspension and mounting of loudspeakers.
1.3 Precautions
Environmental and operational precautions for using loudspeakers.
1.4 Notices
Important notices including disposal, copyright, and disclaimers.
Installation
4.1 Tools list
Lists tools required for EVC loudspeaker installation.
4.2 General aiming and placement guidelines
Advice on optimal placement and aiming for EVC loudspeakers for sound coverage.
4.3 Preparing the EVC loudspeakers for installation
Steps for unpacking, inspecting, and preparing EVC loudspeakers for installation.
4.4 Rotation of high-frequency waveguides
Instructions for rotating the high-frequency waveguide for pattern adjustment.
4.5 Working with mounting accessories
Guidance on using various mounting accessories like U-brackets and wall brackets.
Rigging strength ratings and safety factors
Working load limit and safety-factor definitions
Explains structural ratings, Working Load Limit (WLL), and safety factor definitions for rigging.
Cautions for working load limits and safety factors
Important cautions and requirements regarding working load limits and safety factors for loudspeaker rigging.
Recommended practice for eyebolts
Best practices and recommendations for using eyebolts for suspending loudspeakers.
Suspension line angle limits for individual eyebolts
Specifies allowed angles for suspension lines when using individual eyebolts.
Working load limit for M10 eyebolts and EVC loudspeakers
Details Working Load Limits (WLL) for M10 eyebolts and EVC loudspeakers.
Electrical connection
6.1 Low impedance connection
Describes low impedance connections for EVC loudspeakers using input terminals.
Optional speaker processing
Discusses using Digital Signal Processors (DSP) for EVC loudspeaker optimization and protection.
Technical data
7.1 EVC-1082-96 8" speaker 90x60
Technical specifications for the EVC-1082-96 8-inch loudspeaker with 90x60 coverage.
7.2 EVC-1082-00 8" speaker 100x100
Technical specifications for the EVC-1082-00 8-inch loudspeaker with 100x100 coverage.
7.3 EVC-1122-64 12" speaker 60x45
Technical specifications for the EVC-1122-64 12-inch loudspeaker with 60x45 coverage.
7.4 EVC-1122-95 12" speaker 90x55
Technical specifications for the EVC-1122-95 12-inch loudspeaker with 90x55 coverage.
7.5 EVC-1152-64 15" speaker 60x45
Technical specifications for the EVC-1152-64 15-inch loudspeaker with 60x45 coverage.
7.6 EVC-1152-95 15" speaker 90x55
Technical specifications for the EVC-1152-95 15-inch loudspeaker with 90x55 coverage.
7.7 EVC-1181S 18" subwoofer
Technical specifications for the EVC-1181S 18-inch subwoofer.
Accessories (optional)
8.1 Installation of TK-150 transformer for passive crossovers
Guide for installing the TK-150 transformer for passive crossovers in EVC loudspeakers.
8.2 Input panel covers
Information on optional input panel covers for protection and connector options.
References
9.1 Rigging (printed)
List of printed references related to rigging and construction.
9.2 Mechanical engineering (printed)
List of printed references for mechanical engineering principles.
9.3 Rigging (websites)
List of online resources and websites related to rigging.
Need help?
Do you have a question about the EVC-1082-96 and is the answer not in the manual?
Questions and answers