Electronic Crossover - Xtant 4180X Owner's Manual

ON-BOARD ELECTRONIC CROSSOVER
All Xtant "x", and "ix" Series 2 channel amplifiers have on-
board, two-way electronic crossovers. Xtant 3 and 4 channel mod-
els feature two independent two-way crossovers. Each crossover is tied to a
set of inputs and controls the frequency range of the associated amplifier.
Independent frequency selection is provided for both the High and Low Pass
sections. A set of selectable RCA line outputs (to feed additional components)
are included with each crossover. In addition, each crossover features two on-
board header jumpers (one for the amplifier and one for the RCA line out-
puts) which allow you to select Bypass (Full Range), High Pass, and/or Low
Pass modes. The "ix" Series models offer an additional Band Pass selection.
When chosen, the Band Pass selection is available via the Low Pass jumper
position for the RCA line outputs.
The following Frequency Modules (SIPs)* are available from your Xtant
Dealer: 50 Hz, 70 Hz, 80 Hz, 90 Hz, 120 Hz, 150 Hz, 300 Hz, 500 Hz, 700 Hz,
1 kHz, 3 kHz, 4 kHz, and 5 kHz.
Please refer to the Installer's Reference (insert) for the Frequency Module recep-
tacle location and chart of frequency/SIP value code numbers
* SIP: an acronym referring to multiple resistors in a Single In-Line Package
7