Paradox Spectra SP7000 Programming Manual

Paradox Spectra SP7000 Programming Manual

32-zone wireless transceiver security spectra sp series magellan series systems and 32-zone wireless transceiver security systems
Table of Contents

Advertisement

32-Zone Wireless Transceiver Security Systems
4 to 32-Zone Expandable Security Systems
MG5050E Version 4.96
SP5500 • SP6000 • SP7000

Programming Guide

MG5000 Version 4.7
MG5050 Version 4.7
Version 4.92
SP4000 • SP65
Version 5.16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Spectra SP7000 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Warranty and Limitations
Warranty Information
Details product warranty terms and conditions.
Limitations of Alarm Systems
Explains inherent limitations of alarm systems against security breaches.
UL and ULC Warnings
Lists important safety and installation guidelines for UL/ULC compliance.
Getting Started with the Programming Guide
About this Programming Guide
Explains guide conventions and how to use it with the system.
Installer and System Codes
Details default installer, maintenance, and master codes and their usage.
Entering Programming Mode
Steps to access the system's programming mode.
Installer Quick Menu and Core Functions
Installer Quick Menu
Provides quick access to common programming sections and functions.
Zones
Programming options for system zones, including entry delays.
Delays
Configuration for entry/exit delays and bell cut-off time.
System Planning and Configuration
System Planning
Covers planning for bus modules, keypads, sirens, outputs, and repeaters.
Zone Recognition
Details how zones are recognized for MG and SP series control panels.
Zone Definitions
Explains how to define zone types, partitions, and options.
User and Device Management
User Programming
Details programming user codes, options, and report codes.
Wireless Repeater Programming
Instructions for assigning and configuring wireless repeaters.
Wireless Keypad Programming
Procedures for assigning and configuring wireless keypads.
Communication and Reporting
Communication Programming
Covers GPRS, GSM, IP reporting, and dialer options for system communication.
Report Codes and Partition Accounts
Instructions for setting up report codes and partition account numbers.
Contact ID Report Codes
Lists Ademco Contact ID report codes for event reporting.
Hardware and Technical Details
Trouble Display
Information on viewing and understanding system troubles.
Product Compatibility Chart
Details compatibility of accessories with control panels.
Hardware Connections
Diagrams and explanations for connecting zones, keypads, and modules.
PCB Layouts/Wiring Diagrams
Visual guides to the physical layout and connection points of control panels.
Appendix and Compliance
EN 50131 Programming
Steps to configure the panel for EN 50131 compliance.
Keypad Lockout
Settings for keypad lockout delay and attempt limits.

Table of Contents

Save PDF