Related Manuals for Sicma TB-140
Summarization of Contents
GENERAL INFORMATION
SYMBOLS
Explains the meaning of graphic symbols used to indicate danger levels and important information.
IDENTIFICATION PLATES
Details the structure and placement of identification plates on the shredder.
ALLOWED USE
MAIN PARTS TERMINOLOGY
Identifies and labels the primary components of the SICMA TB shredder.
IMPROPER USE
Technical features
Provides a comprehensive table of technical specifications for various TB shredder models.
SAFETY
SAFETY IN THE WORKPLACE
Highlights common causes of accidents and the importance of safety precautions in the work environment.
OPERATOR'S REQUIREMENTS
Outlines the necessary physical, mental, and training qualifications for safe machine operation.
WORK CLOTHING
Specifies essential personal protective equipment and clothing required for safe operation and maintenance.
GENERAL SAFETY RULES
Covers crucial safety rules to follow during operation, maintenance, and general use of the shredder.
INSTRUCTIONS TO PREVENT FIRE
Provides guidelines for preventing fires and outlines appropriate extinguishing methods and precautions.
ROAD TRANSPORT
HANDLING AND TRANSPORT
Details safe practices for loading, unloading, and transporting the shredder.
STARTING UP
ATTACHMENT TO THE TRACTOR
Explains the procedure for connecting the shredder to a tractor's three-point hitch.
ATTACHMENT TO THE CARDAN SHAFT
HYDRAULIC CONNECTIONS
Describes how to connect the machine's hydraulic side shift to the tractor.
USE OF THE MACHINE
Covers initial checks and procedures to be performed before operating the shredder.
WORKING SPEED
Specifies the recommended working speed range for effective shredding.
ADJUSTMENTS
WORKING HEIGHT ADJUSTMENT
Explains how to adjust the working height of the shredder by modifying the rear roller position.
SIDE SHIFT ADJUSTMENT
Details the process for adjusting the side shift function, applicable to manual and hydraulic systems.
ADJUSTMENT OF BELTS TENSIONER
Guides on correctly adjusting the tension of the drive belts using the automatic tensioner.
ADAPTATION TO TRACTORS WITH PTO AT 1000 rpm
CUTTERS
Describes different types of cutters (knives or hammers) and their suitability for various materials.
MAINTENANCE
MAINTENANCE OF THE MACHINE
Emphasizes the importance of maintenance for longevity, performance, and safety.
FIRST CHECK
Details initial checks required after purchase and before the first operational use.
EVERY 8 HOURS OF WORK
Specifies essential lubrication tasks to be performed after every 8 hours of operation.
EVERY 50 HOURS OF WORK
Lists required checks and maintenance procedures for every 50 hours of machine use.
EVERY 500 HOURS OF WORK
Outlines the maintenance tasks that need to be completed every 500 hours of operation.
EVERY 1000 HOURS OF WORK
Details the maintenance procedures required after every 1000 hours of machine usage.
CUTTERS/HAMMERS CHECK
Explains how to inspect the condition and fixation of the shredder's cutters or hammers.
DRIVE BELTS REPLACEMENT
Provides a step-by-step guide for the replacement of the machine's drive belts.
REPLACEMENT OF OLEODYNAMIC PIPES
Details the safe procedure for replacing hydraulic pipes, including necessary precautions.
FAILURES CHART
A troubleshooting guide listing malfunctions, their probable causes, and recommended solutions.
SPARE PARTS ORDERING
Explains the process and necessary information required when ordering spare parts.
TIGHTENING CHART FOR NUTS AND BOLTS
Provides specific torque values for tightening nuts and bolts to ensure machine integrity.
Need help?
Do you have a question about the TB-140 and is the answer not in the manual?
Questions and answers