Page 1
VT Series OPERATION AND MAINTENANCE MANUAL VT SERIES Battery-Powered Torque Wrenches MODELS VT-500, VT-1000, VT-2000 AND VT-3000 Phone: +1 610-250-5800 Fax: +1 610-250-2700 Toll Free: 1-888-TORCUP-1 Email: sales@torcup.com 1025 Conroy Place, Easton, PA. 18040 U.S.A. Website: www.torcup.com...
Page 2
TorcUP Inc. is not responsible for customer modification of tools or for applications on which TorcUP Inc. was not consulted. WARNING IMPORTANT SAFETY INFORMATION ENCLOSED.
Page 3
• Use only accessories recommended by TorcUP. • Use only impact sockets and accessories. Do not use hand (chrome) sockets or accessories.
2. Do not remove any labels. Replace any damaged labels immediately. 3. Do not lubricate tools with flammable or volatile liquids such as kerosene, diesel or jet fuel. Only use TorcUP recommended lubricants. 4. Only use proper cleaning solvents to clean parts. Use only cleaning solvents which meet current safety and health standards.
Page 5
PLACING THE TOOL IN SERVICE PLACING THE TOOL IN SERVICE 1. Ensure the reaction arm is properly attached and secured to the splined section of the torque tool. 2. Select your desired square drive size and bolt/nut AF size impact socket or hex-drive socket for use. 3.
NOTE: This tool is designed to be operated with right-hand thread fasteners. There is a 15% reverse bias to assist with breakout. If this tool is to be used with left-hand thread fasteners consult TorcUP.
Page 7
After extended use of the VOLTA Series Torque Wrench, in the case of degrading performance or other apparent damage, immediately send your VOLTA Series Torque Wrench to TorcUP, Inc or contact your Local Representative or Distributor. The unit must be properly packaged for shipping.
Series Torque Wrench to your first torque requirement. Tighten fastener as per your required tightening bolt sequence. Then, reset for the next settings. 8. Your personnel can be trained by your TorcUP Representative or Distributor on use of this product if so desired.
BATTERY SAFETY INSTRUCTIONS NOTICE Note: Prior to use, please see pages 17-21 of this user manual to review the battery product safety data sheet. 1. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock and damage the tool.
BATTERY TROUBLESHOOTING 1. If the machine switches off automatically, the machine electronics have activated automatic protection mode. A warning signal sounds (continuous beeping). The beeping stops after a maximum of 30 seconds or when the trigger is released. In spite of this protective function, overloading is still possible with certain applications and can result in damage to the machine.
TECHNICAL SPECIFICATIONS VOLTA VOLTA VOLTA VOLTA MODEL NUMBER 1000 2000 3000 Square Drive 3/4” 1” 1” 1” Min. Torque (ft/lbs) Max. Torque (ft/lbs) 1000 2000 3000 Min. Torque (Nm) 1025 Max. Torque (Nm) 1355 2700 4025 HEIGHT A (w/ battery) (in) 10.40”...
Need help?
Do you have a question about the VOLTA 2000 and is the answer not in the manual?
Questions and answers