Setting The Time - Fossil WRIST NET Reference Manual

If you want your watch to always display the time from one time zone, you can
change from Auto-set to a specific time zone. For example, you may want to stay
in your home time zone while on a trip, or you may take a trip to a location where
there is not MSN Direct coverage. In this case, your watch stays in the specific
time zone until you change it to another time zone or back to Auto-set.
To change the time zone:
1. From the Settings mode, press Next to scroll to Time Zone, and then
press Enter.
2. Press Next until you find the time zone you want, and then press Enter.

Setting the time

If you are receiving a broadcast signal and the watch radio is turned on, you
cannot set the time and date. Your watch automatically receives the correct time
from an atomic clock. If you enter the Set Time setting when it is not available,
you receive the following message:
23