Table of Contents
Advertisement
EFFECTIVE: January 31, 2018
MANUAL
CHAIN HOIST
CF SERIES
MODEL CF4
1/2 Ton through 5 Ton Capacity
Code, Lot and Serial Number
This equipment should not be installed, operated or
maintained by any person who has not read and understood
all the contents of this manual. Failure to read and comply
with the contents of this manual can result in serious bodily
injury or death, and/or property damage.
Advertisement
Chapters
Table of Contents
Related Manuals for Harrington CF050
Summarization of Contents
Important Information and Warnings
Terms and Summary
This manual provides important information for personnel involved with the installation, operation and maintenance of this product.
Hazard Signal Words
Defines signal words used to identify hazard levels: Danger, Warning, Caution, and Notice.
Technical Information
Specifications
Provides detailed technical specifications for the hoist model, including capacity and dimensions.
Dimensions
Illustrates the physical dimensions of the hoist models with corresponding measurements.
Optional Equipment
Details available optional equipment such as latch lock hooks and chain containers.
Preoperational Procedures
Chain
Instructions for verifying the load chain is not twisted or tangled, and hook orientation.
Attachment Points
Ensuring adequacy of attachment points, suspension components, and supporting structure.
Mounting the Hoist
Procedure for securely attaching the hoist's top hook to a fixed suspension point.
Preoperational Checks and Trial Operation
Procedures for confirming capacity, chain, serial numbers, fasteners, and proper operation.
Operation
Introduction
Overview of hoist operation, emphasizing operator qualifications and safety protocols.
Shall's and Shall Not's for Operation
Lists critical do's and don'ts for safe and proper hoist operation to prevent hazards.
Operation
Step-by-step guide on how to operate the hoist for lifting and lowering loads.
Inspection
General
Defines terms and procedures for hoist inspection based on ANSI/ASME B30.16 standards.
Inspection Classification
Classifies inspections into Preoperational, Frequent, and Periodic based on usage and component exposure.
Preoperational Inspection
Visual inspections performed before the first use of each shift, with no records required.
Frequent Inspection
Visual examinations by the operator for defects, including daily, weekly, or monthly checks.
Periodic Inspection
Comprehensive visual inspections by a designated person at yearly or semi-annual intervals.
Occasionally Used Hoists
Inspection requirements for hoists used infrequently, based on idle time.
Inspection Records
Guidelines for maintaining dated inspection reports and records for hoist maintenance history.
Inspection Methods and Criteria
Details specific inspection methods and discard limits for various hoist components.
Maintenance and Handling
Lubrication
Procedures for lubricating the load chain, hooks, suspension components, and gears.
Disassembly, Assembly and Adjustment
Instructions and tools required for disassembling, assembling, and adjusting hoist components.
Hoist Disassembly
Step-by-step guide for disassembling the hoist, including component removal.
Hoist Assembly
Procedures for assembling the hoist components after disassembly, including lubrication.
Chaining
Instructions for attaching and routing load and hand chains for proper hoist operation.
Storage
Guidelines for storing the chain hoist to prevent damage and ensure readiness for use.
Outdoor Installation
Recommendations for outdoor installation, covering protection and inspection for corrosion.
Troubleshooting
Troubleshooting Guide
Guides users through common hoist symptoms, their causes, and remedies.
Warranty
Warranty
Details the warranty terms, periods, and conditions for Harrington Hoists products.
Parts List
1/2 to 5 Ton Parts
Lists specific parts for 1/2 to 5 Ton hoist models with corresponding part numbers.
Additional 2 through 5 Ton Parts
Details additional parts required for 2 through 5 Ton hoist models.
Optional Hooks
Catalog of optional hooks, including Bullard®, Shur-Loc®, and Inspection hook types.
Optional Chain Containers
Lists parts for optional chain containers for CF4 hoist models.
Need help?
Do you have a question about the CF050 and is the answer not in the manual?
Questions and answers