Table of Contents
Advertisement
EFFECTIVE: January 31, 2018
MANUAL
CHAIN HOIST
CF SERIES
MODEL CF4
1/2 Ton through 5 Ton Capacity
Code, Lot and Serial Number
This equipment should not be installed, operated or
maintained by any person who has not read and understood
all the contents of this manual. Failure to read and comply
with the contents of this manual can result in serious bodily
injury or death, and/or property damage.
Advertisement
Chapters
Table of Contents
Related Manuals for Harrington CF010
Summarization of Contents
Important Information and Warnings
Terms and Summary
Provides important information for personnel involved with installation, operation, and maintenance.
Warning Tags and Labels
Details warning tags attached to the hoist and stresses the importance of reading and obeying them.
Technical Information
Specifications
Presents technical specifications including product code, capacity, dimensions, and operating conditions.
Dimensions
Provides detailed dimensional drawings and tables for various hoist models.
Optional Equipment
Describes optional equipment such as latch lock hooks and chain containers.
Preoperational Procedures
Chain
Covers pre-use checks for chain twists, tangles, and capsized hooks to ensure safe operation.
Attachment Points
Ensures that all attachment points and supporting structures are adequate for the hoist and load.
Mounting the Hoist
Instructions for securely mounting the hoist to a fixed location, ensuring proper hook engagement.
Preoperational Checks and Trial Operation
Details critical checks before operation, including capacity confirmation, chain irregularities, and secure fastenings.
Operation
Introduction
Outlines operator responsibilities, required training, and essential safety practices for hoist operation.
Shall's and Shall Not's for Operation
Lists essential rules and prohibitions for safe hoist operation to prevent hazards.
Operation
Provides step-by-step instructions for operating the hoist's lifting and lowering functions.
Inspection
General
Defines terms and references ANSI/ASME B30.16 for inspection procedures.
Inspection Classification
Categorizes inspections (Preoperational, Frequent, Periodic) based on service and component exposure.
Preoperational Inspection
Details visual checks required before each shift to ensure safe operation.
Frequent Inspection
Outlines visual examinations performed regularly, including observations during operation.
Periodic Inspection
Describes thorough visual inspections performed at set intervals, potentially requiring disassembly.
Occasionally Used Hoists
Specifies inspection requirements for hoists used infrequently.
Inspection Records
Emphasizes maintaining dated inspection reports for record-keeping and availability.
Inspection Methods and Criteria
Provides detailed methods and discard limits for inspecting specific hoist components.
Maintenance and Handling
Lubrication
Provides guidelines for lubricating load chains, hooks, suspension components, and gears.
Disassembly, Assembly and Adjustment
Covers procedures for disassembling, assembling, and adjusting hoist components.
Hoist Disassembly
Step-by-step instructions for disassembling the hoist, including required tools.
Hoist Assembly
Guides for reassembling the hoist after disassembly, including lubrication and part placement.
Chaining
Detailed instructions for installing and connecting load and hand chains to the hoist.
Storage
Provides essential guidelines for storing the hoist properly to prevent damage and ensure safety.
Outdoor Installation
Recommendations for protecting the hoist in outdoor installations against corrosion and environmental factors.
Troubleshooting
Troubleshooting Guide
Guides users through common hoist symptoms, causes, and remedies for operational issues.
Parts List
1/2 to 5 Ton Parts
Lists all parts for 1/2 to 5 Ton hoist models, referenced by figure numbers and part codes.
Additional 2 through 5 Ton Parts
Details specific parts for 2 through 5 Ton hoist models not covered in the previous section.
Optional Hooks
Catalogues various optional hook types available, including Bullard®, Shur-Loc®, and Inspection hooks.
Optional Chain Containers
Lists optional chain containers compatible with CF4 models, specifying parts for different capacities.
Need help?
Do you have a question about the CF010 and is the answer not in the manual?
Questions and answers