Advertisement
Digital Pendant and Ring Module V.1
Pendant (back)
SET
Switching Over the Mode:
• The mode will be switched each time the button is pressed respectively as shown in the diagram below.
Time Mode
Press
MODE
SET
MODE
Toggling 12 Hour/24 Hour:
• Press SET to toggle 12 hour or 24 hour format.
MODE
MODE
Setting Time/Date:
1. Press and hold SET for 2 seconds to enter setting mode, the YEAR flashes first for setting, press MODE to advance
the value.
2. Press SET to change next setting item. The setting sequence is a cycle by Year, Month, Date, Hour and Minute.
3. During the setting mode, press MODE to advance the flashing digit.
Note: In setting mode, time will be updated to 24 hour format automatically.
Ring
MODE
MODE
Calendar Mode
Press
MODE
MONTH
DATE
12 hour format
SET
Press SET to toggle
12 hour/24 hour format
SET
24 hour format
SET
Second
Press
MODE
Advertisement
Table of Contents
Need help?
Do you have a question about the Digital Pendant and Ring Module V.1 and is the answer not in the manual?
Questions and answers