Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Leeson SPEEDMASTER SM4 Series
Summarization of Contents
About these instructions
Scope of delivery
Details the items included in the product package.
Technical data
Standards and application conditions
Lists conformity, approvals, and environmental conditions for operation.
Ratings
Details electrical specifications like power, voltage, and current for different models.
Drive Derating
Explains conditions requiring reduced output current or operating limits.
Installation
Dimensions and mounting
Provides physical dimensions and mounting details for NEMA 1 enclosures.
NEMA 1 (IP31) Models > 30HP (22kW)
Specific dimensions and mounting for higher HP NEMA 1 models.
NEMA 4 (IP65)
Details physical dimensions and mounting for NEMA 4 enclosures.
Electrical installation
Covers essential guidelines for electrical connections and setup.
Installation After Long Storage
Procedures for preparing drives after extended periods of storage.
Commissioning
Local Keypad & Display
Explains operation and functions of the local control panel.
INDICATING LEDs (on 4-character display)
Describes the meaning of various status LEDs on the display.
Start Control
Details how to select and manage start command sources.
Reference Control
Explains how to select and manage speed/torque reference sources.
Units LEDs
Indicates which unit of measure is currently displayed.
Drive Displays and Modes of Operation
Describes different display modes and operational states of the drive.
Parameter setting
Guidance on navigating and changing drive parameters.
Electronic programming module (EPM)
Information on the EPM for storing and transferring parameter settings.
Parameter menu
Overview of the parameter structure and basic setup.
Basic Setup Parameters
Configures fundamental operational settings like start control and reference source.
Advanced Setup Parameters
Details advanced configuration options for fine-tuning drive performance.
PID Parameters
Configuration settings for Proportional-Integral-Derivative control loops.
Vector Parameters
Parameters specific to Vector control mode for motor operation.
Network Parameters
Configuration for onboard communication protocols and network settings.
Diagnostic Parameters
Read-only parameters for monitoring drive status and performance.
Onboard Communications Parameters 15-30HP (11-22kW)
Network settings specific to higher HP models.
Sequencer Parameters
Configuration for multi-step operational sequences.
Sequencer Flow Diagram
Visual representation of the sequencer's operational logic and flow.
Sequencer Status
Displays the current status of sequencer segments and outputs.
Troubleshooting and Diagnostics
Status/Warning Messages
Lists and explains common status and warning messages displayed by the drive.
Drive Configuration Messages
Explains the 4-digit codes indicating drive configuration and stop source.
Fault Messages
Lists and explains fault codes, their causes, and remedies.
Appendix A
Permissable Cable Lengths
Provides guidelines for maximum cable lengths based on carrier frequency and EMC filters.
Important Information
Resale of Goods
Legal information regarding the resale of the product.
Need help?
Do you have a question about the SPEEDMASTER SM4 Series and is the answer not in the manual?
Questions and answers