Fossil SPORT DIGITAL UPC-531 Manual

Sport Digital UPC-531
B
E D
A C

Time and Calendar Setting

1. Press and hold pusher C for 3 seconds to enter setting mode. Seconds will begin flashing.
2. Press pusher A to adjust digit.
3. Press pushers D and E to adjust digits up/down.
4. Press pusher C to return to Time and Calendar Mode.
5. Press pusher A to enter T2 Mode. T2 Settings are exactly the same as Time and Calendar Settings.

Chronograph Stopwatch

1. Press pusher E to start/stop the chronograph.
2. Press pusher D to reset to zero.

Lap Counting

1. Press pusher D while chronograph is running. (Will record up to 8 laps.)
2. Press pusher E to finalize timing.
3. Press pusher C to recall laps.
4. Press pusher D to reset to zero.
5. Press pusher A to enter TR Mode.

Count Down/Up Timer Setting

Count Up
1. With timer at zero, press pusher E to start counting.
2. Press pusher E to stop.
3. Press pusher D to reset to zero.
Count Down
1. Press and hold pusher C for 3 seconds to enter Setting Mode. Seconds will begin flashing.
2. Press pusher D and E to adjust digits up/down.
3. Press pusher A to select next digit.
4. Press pusher C to return to Timer Mode.
5. Press pusher E to start/stop timer.
6. Press pusher D to reset.
7. Press pusher A to enter AL Mode.

Alarm Setting (4 alarms)

Use E to turn hourly chime and alarm chime on/off. Hourly chime allows the watch to chime at every hour. Alarm chime turns alarm on/off.
1. Press and hold pusher C for 3 seconds to enter Setting Mode. Minutes will begin flashing.
2. Press pusher D and E to adjust digits up/down.
3. Press pusher A to select next digit.
4. Press pusher C to return to Alarm Mode.
5. Press pusher D to scroll through alarms.
6. Press pusher A to enter Time and Calendar Mode.