Related Manuals for Elka ES 80
Summarization of Contents
Preface
General notes
Provides essential information for safe operation and maintenance of the barrier system.
Symbol explanation
Explains safety symbols used in the manual to indicate potential hazards and important notices.
Copyright
Details the copyright protection for the operating manual content and reproduction restrictions.
Information regarding installation instruction
States the document's purpose as an installation instruction for partly completed machinery.
Safety
General notes on safety
Outlines general safety regulations and standards to be observed during installation and operation.
Notes on safety for the operation
Provides safety guidelines for users, including supervision of children and avoiding danger zones during operation.
Safety notes for the operation with radio remote control
Specifies safety precautions when using the radio remote control for barrier operation.
Intended use of barriers
Defines the primary purpose and acceptable applications for the ES 50-80 barrier models.
Improper use
Highlights prohibited uses and potential dangers resulting from misuse of the barrier system.
Intended use - vehicle traffic, pedestrian traffic impossible
Details intended use for vehicle passage control where pedestrian traffic is excluded.
Intended use - vehicle traffic, pedestrian traffic not impossible
Describes intended use for vehicle passage control where pedestrian traffic may be present.
Danger, which could emanate from the site of operation
Warns about dangers associated with moving parts and operation environment.
Non-factory technical alterations and extensions
Advises against unauthorized modifications and potential hazards.
Personnel requirements – professional skills, knowledge and qualifications
Specifies the necessary qualifications and skills for personnel performing installation and maintenance.
Personal protective equipment
Lists essential personal protective equipment (PPE) required for installation and maintenance tasks.
Transportation and Storing
Transportation inspection
Instructions for inspecting the shipment for damage upon receipt and reporting issues.
Storing
Guidelines for proper storage of the barrier, including environmental conditions and substance avoidance.
Lifting heavy loads
Safety precautions and procedures for lifting heavy components of the barrier system.
Declaration of Conformity
Barrier ES 50-80 – pedestrian traffic impossible
EC Declaration of Conformity for barriers where pedestrian traffic is excluded, listing standards and directives.
Barrier ES 50-80 – pedestrian traffic not impossible
EC Declaration of Conformity for barriers allowing pedestrian traffic, referencing relevant standards.
Declaration of conformity – complete system
Requirement for issuing an EC declaration of conformity for the integrated system.
Name plate
Information regarding the location of the barrier's name plate.
Performance declaration
Notes that the performance declaration is attached as a special annex.
Technical Data ES 50 – ES 80
Operation - Safety – Wind load class
Details technical specifications for operation, safety, and wind load resistance of the barrier models.
Installation ES 50 – ES 80
Basic requirements
Outlines essential prerequisites for barrier installation, including safety distances and foundation requirements.
Controller MO 63
Connections and Wiring
Details terminal connections, further connections, and visual indicators for the MO 63 controller.
Operating Modes
Configures various operating modes including pre-warning, automatic closure, and obstacle reversal.
Programming and Remote Codes
Guides on setting running times, torque, photo-cells, and personal codes for radio remote control.
External Connections
Important instructions when using loops for safety and closing
Key guidelines for safely integrating loop detectors for barrier operation and safety functions.
Fault Finding
The closed barrier doesn't react to a signal to open
Troubleshooting guide for issues where the barrier fails to respond to open commands.
The open barrier doesn't react to signals to close
Troubleshooting steps for when the barrier does not respond to close commands.
Fault finding continued
Further troubleshooting scenarios and solutions for common barrier operational issues.
Error code
Explains the meaning of error codes indicated by the diagnostic LED for fault identification.
Maintenance and Cleaning
Maintenance
Provides a schedule and procedures for routine maintenance tasks to ensure barrier longevity.
Cleaning - outer sides of the barrier housing
Instructions for safely cleaning the external surfaces of the barrier unit.
Cleaning- inside of the housing
Procedures for safely cleaning the internal components and controller unit of the barrier.
Decommissioning
Disposal
Information on the proper and environmentally safe disposal of the barrier system components.
Extra Equipment
Swinging support for ES 50 – 80
Instructions for installing a swinging support for barrier booms of specific lengths.
Fixed support with electromagnet
Details the installation and operation of a fixed support with an electromagnet feature.
Layout (Exploded Drawing)
Layout ES 50 - 80
An exploded view diagram showing all components of the ES 50-80 barrier for identification.
Need help?
Do you have a question about the ES 80 and is the answer not in the manual?
Questions and answers