Denon AVR-4806 Operating Instructions page 2

Before Using
• The following buttons are used to operate the XM radio.
CURSOR D
FUNCTION POWER
CURSOR H
CURSOR F
ON/STANDBY
2 Checking the XM signal strength and Radio ID
1
POWER
Press the
unit.
2
ON/STANDBY
Press the
ON
unit or button on the remote control unit.
3
Set the input source to "TUNER".
(Main unit) (Remote control unit) (Remote control unit)
4
TUNER
Press the
the remote control unit to
select the TUNER mode.
5
Watching the display, press the
to select the XM mode.
ENTER
CURSOR G
STATUS
switch to turn on the main
switch on the main
button on
(Remote control unit)
BAND
button
TUNER
TUNING •
TUNING ª
ENTER
CURSOR F
BAND
6
Press the
until "SIGNAL" is displayed.
• The display changes as shown below according to
the receiving condition.
Display
GOOD
MARGINAL
WEAK
NO
7
Adjust the antenna location until
"SIGNAL:GOOD" is displayed.
8
Press the
(ex.XM001) is displayed.
9
Press the
(XM000).
• The Radio ID is displayed.
X M 0 0 0
2
D
CURSOR
CURSOR G
CURSOR H
STATUS
button on the main unit
Condition
Signal strength is good
Signal strength is marginal
Signal strength is poor
Loss of the signal
STATUS
button until the XM channel
TUNING ª
button to select channel 0
R A D I O I D
ON
SOURCE
TUNER
(Input source)
Radio ID