Advertisement
Quick Links
Installation and Setup guide
VARIO Series
VARIO w8
Contents
Page 2
Pages 3 - 4
Page 5
Page 6
Page 7
Page 8
Page 9 - 11
Box Contents:
Accessories:
(optional)
VARIO i8
Quick Set-Up and Factory Defaults
Complete Set-Up and Installation
VARIO Remote Controller (VRC)
Feedback System
Bracketry
Specifications
Troubleshooting
VARIO illuminator with 35˚ beam angle IHD
60˚ beam angle IHD
VARIO Remote Controller for additional programming of the unit
80˚ beam angle IHD
120˚ beam angle IHD
VARIO w4
VARIO i4
VARIO w2
VARIO i2
Advertisement
Related Manuals for Raytec Vario I2
Summarization of Contents
Quick Set-Up and Factory Defaults
Wiring - Six Core Cable
Details wiring connections for DC/AC power, photocell, and telemetry.
Factory Default Settings
Lists default configurations including beam angle, power, and sensitivity.
Complete Set-Up and Installation
Selecting Beam Angle
Instructions on changing the beam angle using interchangeable holographic diffuser lenses.
Mounting the Illuminator
Guides on positioning and securely mounting the VARIO illuminator unit.
Connecting Power Supply
Steps for connecting the illuminator to a 12-24V AC/DC low voltage power supply.
Configuring Telemetry Input
Details on connecting telemetry input for photocell, PIR, or TTL control.
Photocell Following Output
Explains the volt-free output for controlling camera day/night switching.
VARIO Remote Controller (VRC) Operation
Photocell Sensitivity Adjustment
Allows selection of 3 different photocell sensitivity levels.
Power Output Selection
Enables quick selection of 5 defined power settings from 20% to 100%.
Disabling Photocell Operation
Disables photocell control, enabling operation solely via telemetry input.
Timer Function Settings
Sets the timer for the illuminator to remain on for a predefined period.
Locking Remote Control Settings
Locks current settings to prevent further alterations after 4 seconds.
Feedback System and LED Indicators
LED Status in Programming Mode
Explains LED indicator meanings (Green, Amber, Red) during programming mode.
LED Status in Normal Operation
Explains LED indicator meanings (Green, Amber, Red) during normal operation.
Bracketry Options
Standard Mounting Brackets
Illustrates standard bracket types for VARIO 2, 4, and 8 series with dimensions.
Optional Mounting Brackets
Shows optional brackets including Wall, PTZ, Dome, and Pole mounts.
VARIO Product Specifications
Maximum Illumination Distance
Details max illumination distances for VARIO models and beam angles.
Power Consumption
Specifies power consumption for different VARIO models.
Input Power Requirements
Details required input voltage and type (AC/DC) for VARIO units.
Unit Weight
Provides the weight for different VARIO models.
Environmental Protection Rating
States the IP rating for environmental protection of VARIO units.
Physical Dimensions
Lists the length, width, and depth for VARIO models.
Standard Cable Length
Indicates the standard cable length provided with VARIO units.
Compliance Standards
Lists relevant product compliance standards and certifications.
Troubleshooting Guide
Basic Checks
Covers checks for power, telemetry wires, photocell function, and power supply rating.
Lamp Performance Test
Procedure for testing lamp operation by checking current draw and input conditions.
Setup and Illumination Checks
Guides on verifying model specs, unit orientation, lens angle, and LED status.
Interpreting LED Status Indicators
Details LED meanings in programming and normal operating modes for diagnostics.
Need help?
Do you have a question about the Vario I2 and is the answer not in the manual?
Questions and answers