Bernina BERNETTE 80e Manual
Hide thumbs Also See for BERNETTE 80e:

Advertisement

When using an electrical appliance, basic safety precautions
should always be followed, including the following:
Read all instructions before using this sewing machine.
DANGER
- To reduce the risk of electric shock:
1. An appliance should never be left unattended when
plugged in.
2. Always unplug this appliance from the electric outlet
immediately after using and before cleaning.
3. Always unplug before re-lamping. Replace bulb with same
type rated 5 watts/ 12V
WARNING
- To reduce the risk of burns, fire,
electric shock, or injury to persons:
1. Do not allow to be used as a toy. Close attention is necessary
when this appliance is used by or near children and infirm
persons.
2. Use this appliance only for its intended use as described in this
manual. Use only attachments recommended by the
manufacturer as contained in this manual.
3. Never operate this appliance if it has a damaged cord or plug,
if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the appliance to the
nearest authorized dealer or service center for examination,
repair, electrical or mechanical adjustment.
EN
SERVICING
DOUBLEINSULATED
PRODUCTS
In a double-insulated product, two systems of insulation are
provided instead of grounding. No grounding means is provided
on a double-insulated product nor should a means for grounding
be added to the product. Servicing a double-insulated product
requires extreme care and knowledge of the system and should
only be done by qualified service personnel. Replacement parts for
a double-insulated product must be identical to those parts in the
product. A double insulated product is marked with the words
"DOUBLE INSULATION" or "DOUBLE INSULATED".
The symbol
may also be marked on the product.
IMPORTANT SAFETY INSTRUCTIONS
4. Never operate the appliance with any air openings blocked.
5. Keep fingers away from all moving parts. Special care is
6. Always use the proper needle plate. The wrong plate can
7. Do not use bent needles.
8. Do not pull or push fabric while stitching. It may deflect the
9. Switch the sewing machine off ("O") when making any
10. Always unplug sewing machine from the electrical outlet when
11. Never drop or insert any object into any opening.
12. Do not use outdoors.
13. Do not operate where aerosol spray products are being used
14. To disconnect, turn all controls to the off ("O") position, then
15. Do not unplug by pulling on cord. To unplug, grasp the plug,
16. This machine is provided with double insulation. Use only
SAVE THESE
INSTRUCTIONS
This sewing machine is intended for household use only.
Keep ventilation openings of the sewing machine and foot
controller free from accumulation of lint, dust, and loose
cloth.
required around the sewing machine needle.
cause the needle to break.
needle causing it to break.
adjustments in the needle area, such as threading needle,
changing needle, threading bobbin, or changing presser foot,
and the like.
removing covers, lubricating, or when making any other user
servicing adjustments mentioned in the instruction manual.
or where oxygen is being administered.
remove plug from outlet.
not the cord.
identical replacement parts. See instructions for Servicing of
double-insulated machines.
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BERNETTE 80e and is the answer not in the manual?

Questions and answers

Summarization of Contents

IMPORTANT SAFETY INSTRUCTIONS
DANGER
Critical warnings to reduce risk of electric shock.
WARNING
Safety precautions to reduce risk of burns, fire, electric shock, or injury.
SERVICING DOUBLEINSULATED PRODUCTS
SAVE THESE INSTRUCTIONS
Instruction to keep the manual for future reference.
Principal Parts Identification
Core Stitching Controls
Key controls for stitch length, width, tension, and pressure.
Machine Operation and Support Components
Parts for starting, winding, and guiding threads.
Accessory and Convenience Features
Table, box, handle, and secondary spool pin provision.
Principal Parts - Specialized Controls
Model-Specific Display and Buttons
LCD screens and buttons for specific machine models.
Advanced Adjustment Features
Features like speed limiting and automatic needle threading.
Machine Accessories
Standard Included Accessories
Common accessories provided with the machine.
Optional Accessories Available
Additional accessories for enhanced functionality.
Sewing table
Sewing table as accessory box
The sewing table can be used for storing accessories.
Quick reference drawer
Using the quick reference drawer
How to access and interpret stitch setting information.
Connecting machine to power source
Connecting the power cord
Steps for safely connecting the machine to electricity.
Polarized plug notice
Important safety information regarding polarized plugs.
Two-step presser foot lever
Using the two-step lever
How to raise the presser foot to a second stage.
Adjusting the presser foot pressure
Adjusting presser foot pressure
How to adjust the pressure for different fabric types.
Attaching the presser foot holder
Attaching the presser foot
Steps to attach a presser foot to the holder.
Removing the presser foot
Steps to detach a presser foot from the holder.
Attaching the seam guide
How to attach and use the seam guide accessory.
Winding the bobbin
Steps for winding a bobbin
Detailed instructions on how to wind thread onto a bobbin.
Inserting bobbin
Inserting bobbin into bobbin case
How to correctly place a bobbin into the bobbin case.
Inserting the needle
How to insert a needle
Correct procedure for inserting a sewing machine needle.
Needle condition
Importance of needle condition and common problems.
Threading the upper thread
Step-by-step threading
Detailed instructions for threading the upper thread correctly.
Automatic needle threader
Using the automatic needle threader
How to use the automatic mechanism to thread the needle.
Thread tension
Upper thread tension adjustment
How to adjust upper thread tension for optimal stitching.
Bringing up the lower thread
Retrieving the bobbin thread
Method to bring the bobbin thread up to the top for starting to sew.
Starting to sew
Reverse sewing
How to perform reverse stitching to secure seams.
Removing the work
Procedure for safely removing fabric from the machine.
Cutting the thread
How to cut threads using the machine's built-in cutter.
How to drop feed dog
Dropping the feed dog
Instructions for lowering the feed dog for specific sewing tasks.
Needle up/ down
Using the needle up/down button
How to control needle position for precise sewing.
Speed limiting adjustment
Adjusting sewing speed
How to control the machine's sewing speed using a lever.
Adjust pattern balance
Distorted stretch stitch patterns
Adjusting patterns that appear too open or too close.
Stitch density of buttonhole
Adjusting stitch density for buttonholes.
NEEDLE, FABRIC, THREAD SELECTION GUIDE
Needle, Fabric, Thread Matching
Guidance on selecting appropriate needles, fabrics, and threads.
Needle Types and Applications
Details on different needle types and their uses.
Notes on Needles
Important tips regarding needle usage and replacement.
How to choose your pattern
Selecting stitch patterns
Guide to choosing and setting stitch patterns using dials.
LCD (Liquid crystal display)
Understanding LCD information
Explanation of symbols and settings displayed on the LCD screen.
General instructions of LCD
Buttonhole settings on LCD
LCD display settings for buttonhole stitches.
Practical stitch settings on LCD
LCD display settings for practical stitch types.
Straight stitching and needle position
Stitch length for straight stitching
How stitch length affects fabric and thread for straight stitches.
Needle position adjustment
How to change needle position using the stitch width dial.
Zigzag stitching
Stitch width for zigzag
Adjusting zigzag stitch width for different patterns and twin needles.
Stitch length for zigzag
How stitch length affects zigzag stitch density and appearance.
Satin stitch
Using short stitch length for satin stitch effects.
Blind hem/ lingerie stitch
Sewing a blind hem stitch
Instructions for creating blind hems on various fabrics.
Overlock stitches
Using overlock stitches
Settings for overlock stitches for seams and neatening.
Sewing on buttons
Attaching buttons
Steps for sewing buttons onto fabric, including shank buttons.
How to sew buttonholes
Preparing for buttonholes
Steps to prepare fabric and attach the buttonhole foot.
Sewing buttonholes
Step-by-step guide to sewing buttonholes.
Zippers and piping
Sewing zippers
How to insert zippers using the zipper foot.
Hemmer foot
Using the hemmer foot
Instructions for creating neat hems with the hemmer foot.
3-step zig-zag
Applications of 3-step zig-zag
Uses for 3-step zig-zag stitch like mending and reinforcing.
Stitch selection
Triple straight stitch
How to set up for triple straight stitch for strong seams.
Triple zig-zag stitch
How to set up for triple zig-zag stitch for durable seams.
Smocking stitch
Sewing smocking stitch
Settings for creating smocking stitches on garments.
Cording foot
Using the cording foot
How to attach and use the cording foot for decorative effects.
Free motion darning
Performing free motion darning
Steps for darning using the free motion foot.
Practical stitches
Shell hem stitch
Creating decorative shell hems with specific settings.
Rampart stitch
Using Rampart stitch for joining seams and elastic.
Bridging stitch
Applying Bridging stitch for decorative seams and gathering.
Scallop stitch
Creating delicate edge finishes with the Scallop stitch.
Decorative stitches
Square stitch
Using Square stitch for decorative effects and embroidery.
Decor stitch
Applying the Decor stitch for attractive decorative finishes.
Darning
Darning stitch setup
Machine settings for performing darning stitches.
Attaching lace
Sewing lace onto fabric
Instructions for attaching lace using various stitches.
Applique
Performing applique
Steps for sewing applique designs onto fabric.
Twin needle
Using the twin needle
How to thread and use a twin needle for parallel stitches.
Quilt stitch
Quilt stitch settings
Settings for different quilt stitches for various sewing projects.
Quilting
Using the quilting guide
How to use the quilting guide for consistent stitching.
Gathering
Sewing with the gathering foot
Instructions for using the gathering foot to create ruffles.
Walking foot
Attaching the walking foot
Steps to attach the walking foot accessory to the machine.
Using the walking foot
Benefits and usage of the walking foot for difficult fabrics.
Maintenance
Cleaning the stitch plate
How to remove and clean the stitch plate.
Cleaning and lubricating the hook
Steps to clean and lubricate the machine's hook mechanism.
Light bulb replacement
Replacing the light bulb
Instructions for replacing the sewing machine's light bulb.
Trouble shooting guide
Troubleshooting common problems
Guide to identify and resolve common sewing machine issues.

Table of Contents

Save PDF