Removing Or Modifying Your Mcafee Quickclean Installation - McAfee QUICKCLEAN 3.0 Manual

Installing McAfee QuickClean
Removing or modifying your McAfee QuickClean
installation
20 McAfee QuickClean 3.0
Step 3: Clean your hard drive
Run the Windows hard drive utilities, ScanDisk and Disk Defragmenter to
identify and fix any errors on your hard drive:
Click Start on the Windows taskbar, point to Programs, then Accessories,
1
then System Tools, and click ScanDisk.
In the ScanDisk window, select Standard and Automatically fix errors.
2
Click Advanced. In the Advanced Settings dialog box, make sure the
3
following settings are selected:
M
Only if errors found
M
Replace log
M
Delete
M
Free
Ignore the other options, and click OK. Click Start. ScanDisk begins
4
scanning your drive for errors. Depending on the size of your hard drive,
ScanDisk may take several minutes to complete its job.
When ScanDisk is finished, close ScanDisk.
5
Click Start on the Windows taskbar, point to Programs, then Accessories,
6
then System Tools, and click Disk Defragmenter.
Click OK to start Disk Defragmenter. Depending on the speed of your
7
computer and the size of your drive, this may take several minutes to
complete.
Close Disk Defragmenter when it has finished defragmenting your disk.
8
If your computer's operating system is...
n Windows NT Workstation
n Windows 2000 Professional
n Windows XP Home Edition
n
Windows XP Professional Edition
...you must log on to your computer as a user profile with administrative
rights.
Then do the following: