Removing Sensors - McAfee EPOLICY ORCHESTRATOR 4.0.2 Product Manual

Detecting Rogue Systems
Working with sensors
Task
For option definitions, click ? on the page displaying the options.
1 Select the system whose description you want to edit, and click Edit Description.
2 In the Action pane, type the description and click OK.

Removing sensors

Use any of these tasks to remove sensors from systems on your network.
Tasks
Removing sensors from specific systems
Using client tasks to remove sensors
Removing sensors from specific systems
Use this task to remove sensors from specific systems on your network. This task creates a
deployment task that removes the sensor from the selected systems, then performs an immediate
agent wake-up call on them.
This task can be performed from:
Managed Systems for Subnet xxx.xxx.xxx.xxx page.
Systems Details page.
Systems page.
Task
For option definitions, click ? on the page displaying the options.
1 Select the systems you want to remove sensors from, and click Rogue Sensor Remove.
• In the Systems Details page, you can remove the sensor from only the system you
are viewing.
• In the Managed Systems for Subnet xxx.xx.xx.x page, select the systems you
want to remove sensors from.
• In the Systems page, select the desired group in the System Tree, and select the
systems you want to remove sensors from.
NOTE: If the Rogue Sensor Remove button is not visible, click More Actions and select
Rogue Sensor Remove.
2 In the Action pane, click OK.
Using client tasks to remove sensors
Use this task to create a client task to remove sensors from systems on your network.
McAfee ePolicy Orchestrator 4.0.2 Product Guide
Getting there
Go to Network | Detected Systems and click any
subnet category in the Subnet Status monitor, then
select any subnet and click View Managed Systems.
Go to Systems | System Tree | Systems and click any
system.
Go to Systems | System Tree.
209