Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for OHAUS Ranger R21PE3
Summarization of Contents
2. Installation
2.1 Package Contents
Lists items included in the scale package.
2.2 Installing Components
Instructions for installing the weighing pan onto the scale.
2.3 Selecting the Location
Guidelines for choosing a suitable and stable location for the scale.
2.4 Leveling the Equipment
Instructions on how to level the scale using the built-in level indicator.
2.5 Connecting Power
Steps for connecting the scale to AC power and battery power.
2.5.1 Battery Power
Details on scale operation using battery power and charging procedures.
3. Operation
3.1 Controls Overview
Explanation of the control panel, buttons, and their functions.
3.2 Scale Power
Instructions for turning the scale on and off.
3.3 Weigh Mode
How to use the scale in its default weighing mode.
3.4 Percent Mode
Steps for operating the scale in percent mode for relative measurements.
3.5 Counting Mode
Guide to using the scale for counting items based on average piece weight.
3.6 Check Mode
Procedures for check weighing (weight, percent, count) against target limits.
3.7 Dynamic Mode
How to weigh unstable loads using dynamic averaging.
3.8 Accumulation and Statistics
Using the accumulation feature for totalizing values and viewing statistics.
3.9 Additional Features
Using the weigh below hook accessory for suspended weighing.
4. Menu Settings
4.1 Menu Structure
Overview of the scale's menu hierarchy and available options.
4.2 Menu Navigation
How to navigate through menus and edit settings using buttons.
4.3 Calibration Menu
Procedures for performing span, linearity, and geographic calibration.
4.4 Setup Menu
Configuring scale parameters like reset, power-on unit, and zero range.
4.5 Readout Menu
Setting user preferences for display stability, filtering, and auto-off.
4.6 Mode Menu
Activating and configuring specific weighing modes (Weigh, Percent, Count, Check, Dynamic).
4.7 Unit Menu
Activating and selecting units of measurement for display and use.
4.8 Print Menu
Configuring printing parameters, content, and format.
4.9 COM Menu
Defining communication parameters for the RS232 interface.
4.10 Lock Menu
Locking menu settings to prevent unauthorized changes or tampering.
4.11 End Menu
Exiting the menu system and returning to the active weighing mode.
5. Legal for Trade
5.1 Settings
Steps required before verification and sealing for trade use.
5.2 Verification
The process of official verification by authorities.
5.3 Sealing
Applying security seals to maintain integrity of settings.
6. Maintenance
6.1 Cleaning
Instructions on how to properly clean the scale housing and control panel.
6.2 Troubleshooting
Common problems, their possible causes, and recommended remedies.
6.3 Service Information
Contact details for service assistance and technical support.
6.4 Accessories
List of optional accessories available for the scale.
7. Technical Data
7.1 Specifications
Detailed technical specifications and performance parameters of the scale models.
7.2 Drawings
Diagrams showing the scale's physical dimensions and layout.
7.3 Communication
Information about the scale's RS232 interface and computer connectivity.
7.3.1 Interface Commands
A list and explanation of commands for RS232 communication.
7.3.2 Connections for RS232
Pinout diagram and details for the RS232 connector.
7.4 Printouts
Examples of different printout formats generated by the scale.
7.5 Output Format
Details on the fixed length and structure of printout strings.
Need help?
Do you have a question about the Ranger R21PE3 and is the answer not in the manual?
Questions and answers