Advertisement
Table of Contents
- 1 Explanation of Dangerous Level
- 2 Explanation of Warning Signs and Labels
- 3 Index
- 4 General Safety Instructions
- 5 Special Warning for Electric Connection
- 6 Important Safety Instructions
- 7 Warning
- 8 Specifications
- 9 Types of the Standard Ornamentation Cam (16 Pieces)
- 10 Description of Ornaments
- 11 Stitch Example
- 12 Adjust the Ornamental Cam and Ornamental Rod
- 13 Adjust the Gearbox
- 14 Timing and Position Adjustment of the Ornamental Cam
- 15 Adjust the Ornamental Pushing Rod
- 16 Adjust VSQ Gauge Set
- Download this manual
Advertisement
Table of Contents
Related Manuals for Siruba VC008 VSM
Summarization of Contents
EC Declaration of Conformity
Machine Compliance Statement
Declaration that the machine meets EU directives.
Basis for Safety Compliance
Cites relevant European directives and standards.
Notified Body for Conformity
Identifies the organization that assessed compliance.
Safety Level and Warning Explanations
Understanding Hazard Levels
Explains the meaning of 'Dangerous' and 'Caution' symbols.
Warning Signs and Labels Guide
Details the visual warnings and their interpretations.
General Safety Instructions
Work Area and Personal Safety
Covers cleanliness, environment, shock protection, children, dress, cord.
Machine Maintenance and Handling
Covers care, servicing, and cord safety.
Operational Safety Practices
Covers disconnection, unintentional start, part checks, warnings, and repairs.
Electrical Connection Safety Precautions
Specific warnings for connecting the machine to power.
Important Safety Instructions
Pre-Operation and Manual Guidance
Emphasizes reading manuals and following country standards.
Safety Equipment and Operator Requirements
Covers safety gear, trained operators, and power-off procedures.
Maintenance and Repair Safety Protocols
Details safety for repairs, hazardous substances, and qualified personnel.
Operational Environment and Checks
Covers machine operation, part inspection, and pneumatic safety.
Operational Environment and Modifications
Covers machine placement, power plugs, intended use, and modifications.
Warning Sign Interpretation and Personal Protection
Explains warning symbols and preventing entanglement.
Safe Finger and Body Placement
Warns against placing body parts near moving machine elements.
Machine Movement and Electrical Safety
Covers safety during head tilting, servo motors, and ground wire.
Electrical Component Protection During Connections
Advises power off before plug operations.
Warning
Pre-Operation Checks and Confirmations
Covers cleaning, voltage, plug, rotation direction.
Power Off Before Adjustments
Reiterates power off for any adjustments.
Machine Specifications
Technical Specifications Overview
Details machine model specifications.
Standard Ornamentation Cam Types
Lists available decorative cams.
Ornamentation Description
Ornament Threading Diagram
Illustrates how threads are routed for ornamentation.
Stitch Examples
Ornamental Stitch Patterns
Shows examples of decorative stitches made with cams.
Ornamental Cam and Rod Adjustment
Ornamental Cam Usage and Replacement
Explains how to use and change cams.
Gearbox Adjustment
Gearbox Positioning Control
Describes how to adjust the gearbox's location.
Ornamental Cam Timing and Position
Initial Cam Timing Setup
Sets reference cams for timing.
Adjusting Ornamental Rod Travel
Modifies the range of motion for the ornamental rod.
Fine-Tuning Cam Alignment
Aligns cams with needles for precise timing.
Ornamental Pushing Rod Height Adjustment
Vertical Height Calibration
Sets the rod's height relative to the needle plate.
Ornamental Pushing Rod Horizontal Adjustment
Left-to-Right Position Calibration
Adjusts the rod's side-to-side position.
VSQ Gauge Set Adjustment
Feed Dog Height Setting
Adjusts the feed dog's height.
Needle Bar Height Setting
Sets the needle bar's vertical position.
Presser Foot Tension Adjustment
Modifies presser foot spring tension.
Looper Installation and Height
Details looper installation and height adjustment.
Looper Timing and Clearance
Explains how to time and set looper clearance.
Need help?
Do you have a question about the VC008 VSM and is the answer not in the manual?
Questions and answers