Aligning the Print Head (part 2)
2 2 2 2
Select a pattern sample for "Pattern B".
Look at the chart B on your test chart. Select the number
under the pattern sample, in which
to the center of the two horizontally parallel lines.
Example:
-6
-8
-7
-6
-5
-4
-3
3 3 3 3
Select pattern samples for "Pattern C" and
"Pattern D" respectively.
Look at the chart C and D on your test chart. Select the
numbers under the pattern samples, which have the
straightest lines.
Example:
-6
Cracked line
-6
-5
-4
-3
How to Use the
Printer Properties
Online Manual
is located the closest
+8
-2
-1
0
+1 +2 +3 +4 +5 +6 +7 +8
+1
Straight line
-2
-1
0
+1 +2 +3 +4 +5 +6
6 6 6 6
Click the "OK" button in the "Align print head"
dialog box.
The print head will align itself.
! If you cannot find any satisfactory pattern sample for
each of "Pattern A" to "Pattern D" settings, select the
best ones among the printed pattern samples, and
then go back to step 3.
! The printer cannot perform other operations while
aligning the print head.
Print
Maintenance
Maintenance
39
Troubleshooting