Related Manuals for Logicube Forensic Falcon
Summarization of Contents
Limitation of Liability and Warranty Information
Logicube Disclaimer
Details Logicube's liability limitations for product use and damages.
Warranty
Outlines the terms and conditions of the product warranty.
Getting Started
2.0 Overview of the Falcon
Provides a general introduction to the Falcon's features and user interface.
2.1 Turning the Falcon on and off
Instructions on how to power the Falcon unit on and off correctly.
2.2 Connecting Various Drive Types
Details on connecting different types of storage drives to the Falcon.
Quick Start
3.0 Quick Start Guide
A basic overview of performing operations like Image, Hash, and Wipe.
3.1 Imaging
Explains the imaging operation, its modes, and settings.
Imaging
5.0 Imaging - Introduction
Overview of the imaging operation and its available modes and settings.
5.0.1 Mode
Selection of different imaging modes like Drive to Drive or Drive to File.
5.0.3 Settings
Accessing and configuring various imaging settings.
5.0.3.9 Hash/Verification Method
Choosing hash algorithms (SHA-1, SHA-256, MD5) and verification methods.
5.1 Starting the Imaging Operation
Steps to initiate and start the imaging process after configuration.
Types of Operations
6.0 Types of Operations - Introduction
An overview of the fourteen operation types available on the Falcon.
6.0.1 Imaging
Details on the imaging operation, its modes, and settings.
6.0.3 Wipe / Format
Operations for erasing, wiping, and formatting drives.
6.0.5 Task Macro
Creating and executing sequences of operations.
6.0.11 System Settings
Configuring user profiles, passwords, encryption, language, display, and notifications.
Drive Encryption and Decryption
8.0 Drive Encryption/Decryption - Introduction
Introduction to encrypting and decrypting data on destination drives.
8.1 Encrypting a Destination
Steps to encrypt a destination drive using the Falcon's settings.
8.2 Decrypting a Falcon encrypted Destination drive with a Falcon
How to decrypt drives encrypted by the Falcon using the Falcon itself.
8.3 Decrypting the drive without a Falcon
Methods for decrypting drives using third-party software without the Falcon.
Updating the Falcon Software
9.0 Loading New Software
Overview of how to load new software onto the Falcon.
9.1 Software Loading Instructions
Methods for updating Falcon software via network or USB drive.
9.2 Firmware Loading Instructions
Steps to check for and perform firmware upgrades.
Remote Operation
10.0 Remote Operation - Introduction
Overview of connecting to the Falcon remotely via network.
10.1 Web Interface
Accessing and controlling the Falcon through its web interface.
10.2 Command Line Interface (CLI)
Using the text-based command line interface for advanced control.
10.5 Configuring the Falcon with a static IP address
Steps to configure a static IP address for the Falcon.
Viewing Source and Destination Drives over a Network
11.0 Viewing drives over a network - Overview
Overview of viewing connected drives over a network.
11.1 Viewing Source or Destination drives over the network using SMB
Accessing drives via SMB protocol using network file explorers.
11.2 Viewing Source drives over the network using iSCSI
Viewing source drives over the network using the iSCSI protocol.
Optional Adapters
12.0 Optional Adapters - Introduction
Introduction to various optional adapters for drive connectivity.
12.3 PCIe Adapter Kit (for M.2 and PCIe)
Using the PCIe adapter kit for M.2 and PCIe SSDs and cards.
12.4 USB 3.0 to SATA Adapter
Using the USB 3.0 to SATA adapter for connecting SATA drives.
SCSI Module
13.0 SCSI Module - Introduction
Introduction to the SCSI module for connecting SCSI drives.
13.1 Instructions - How to attach the SCSI module
Step-by-step guide on how to physically attach the SCSI module.
Printing Log Files
15.0 Printing Log Files - Introduction
Overview of printing log files from the Falcon.
15.2 Configuring a local or networked printer
Setting up local or networked printers for the Falcon.
Security – Changing the default passwords
16.0 Changing the default passwords - Introduction
Importance of changing default passwords for security.
16.0.1 Changing both the logicube and it passwords
Steps to change both the 'logicube' and 'it' user account passwords.
FREQUENTLY ASKED QUESTIONS
17.0 FAQs
Answers to common questions regarding the Falcon's operation and features.
Need help?
Do you have a question about the Forensic Falcon and is the answer not in the manual?
Questions and answers