Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Astralpool EvoLine 35
Summarization of Contents
Performance and Installation
1.1 Performance and Features
Details key features like high efficiency, long lifespan, and easy operation.
1.2 Working Principles
Explains how the heat pump absorbs heat from the air and transfers it to the pool water.
1.3 Location of Heat Pump Installation
Covers factors for optimal performance and required clearance for installation.
1.4 Distance from the Pool
Discusses the impact of distance on heat loss and optimal radius.
1.5 Installation of the Check-Valve
Advises on installing a check-valve to protect the heat exchanger from chemicals.
1.6 Pool System Set Up
Illustrates the connection of the heat pump within the pool's circulation system.
1.7 Connecting the By-Pass
Details the configuration of a bypass system for controlling water flow.
1.8 Warnings
Provides critical safety warnings regarding operation and handling of the heat pump.
1.9 First Time Start-Up
Guides users through the initial setup and first operation of the heat pump.
1.10 Condensation
Explains the phenomenon of condensation on the evaporator fins.
Heat Pump Control Display Operation
2.1 Control Display Illustration
Covers the control panel illustration, button functions, and icon definitions.
2.1.2 Power ON/OFF Heat Pump
Explains how to turn the heat pump on and off using the control panel.
2.1.3 How to Change Mode
Details how to switch between auto, heating, and cooling modes.
2.1.4 Adjust Desired Water Temperature
Guides on setting the target water temperature for the pool.
2.1.5 Check and Set Parameters
Explains how to access and modify various operational parameters.
2.1.6 Setting Time
Describes how to set the current time on the control display.
2.1.7 Setting Timer On/ Timer Off
Instructions for configuring the timer for automatic operation.
2.1.8 Cancellation of Timer Off
Explains how to disable or cancel the timer function.
2.1.9 Key Pad Lock
Details how to lock and unlock the control panel keypad.
APP Controller Operation
2.2.1 Working Principle of APP Control
Outlines requirements and principles for controlling the heat pump via a mobile app.
2.2.2 Set Up of the Network
Step-by-step guide for connecting the heat pump to a Wi-Fi network and app.
2.2.3 APP Operation
Covers the main functions and interface of the mobile application.
Protection Systems
3.1 Water Flow Switch
Explains the function of the water flow switch for safe operation.
3.2 Refrigerant Gas High and Low Pressure Protection
Details protections against abnormal refrigerant pressure levels.
3.3 Overheating Protection on the Compressor
Describes the mechanism to prevent compressor overheating.
3.4 Automatic Defrost Control
Explains the automatic process to remove ice buildup on the evaporator.
3.5 Temperature Difference Between Inflowing and Outflowing Water
Covers protection based on water temperature difference.
3.6 Low Temperature Cut-Out
Details the protection that turns off the unit at low water temperatures.
3.7 Anti-Frost Protection During Winter
Explains the protection against freezing during winter standby.
3.8 First Anti-Frost Protection
Describes the initial anti-frost protection for the filter pump.
3.9 Second Anti-Frost Protection
Details the advanced anti-frost protection to heat the water.
Maintenance and Troubleshooting
4.1 Swimming Pool Water Chemistry
Advises on maintaining correct chemical balance for pool water.
4.2 Heat Pump Winterizing
Provides essential steps for preparing the heat pump for winter.
4.3 Restarting the Pump After Winter
Guides on safely restarting the heat pump after winter storage.
4.4 Check-Up
Recommendations for routine checks to ensure optimal performance.
5.1 Maintenance
Specific maintenance tasks for ensuring reliability and efficiency.
5.2 Trouble Shooting Guide
Provides solutions for common operational problems and error codes.
5.3 Failure Code Table for AP Board
Lists failure codes, their causes, and recommended solutions.
Technical Specifications and Diagrams
Parameter Table Overview
Presents detailed parameter settings and their ranges for the heat pump.
System Measure Value Overview
Lists measured system values such as water and ambient temperatures.
6. Exploded View
A reference to a diagram illustrating the unit's components.
7. Product Recycling
Information on the proper disposal and recycling of the heat pump.
8. Exploded Diagram
Detailed breakdown of the heat pump unit components with labels for different models.
Figure 1 – Power Connection
Details electrical connection requirements, including voltage and cable specifications.
Customer Information
A la Atención de Nuestros Clientes
Important advice and warnings for customers regarding installation and use.
Need help?
Do you have a question about the EvoLine 35 and is the answer not in the manual?
Questions and answers