Checking The Xm Signal Strength And Radio; Channel Selection; Category Search; Direct Access Of Channels - Denon DRA-697CI Operating Instructions Manual

Operation
Checking the XM signal strength and Radio ID
1
FUNCTION
Use to select "XM" or press
2
STATUS
Press until "SIGNAL" is displayed.
• The display changes as shown below according to the receiving
condition.
Display Condition
GOOD Signal strength is good
MARGINAL Signal strength is marginal
WEAK Signal strength is poor
NO Loss of the signal
3
Adjust the antenna location until "SIGNAL:GOOD"
is displayed.
4
STATUS
Press until the XM channel (ex.XM001) is
displayed.
5 TUNING
Press to select channel 0 (XM000).
X M 0 0 0 R A D I O I D
¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ Radio ID

Channel selection

1 FUNCTION
XM RADIO Use to select "XM" or press
.
2
TUNING
Press to reach the desired channel.
Channel number
X M 0 4 0 D e e p T r k s
¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ¡
The channel changes continuously when you press and hold
TUNING.
When the artist name and song title are received, they are
displayed.

Category search

1
[F F G G ]
Press in the XM mode.
• The current category name is displayed.
X M 0 0 6 6 0 ' s
C A T : R o c k
2
[F F G G ]
Press to select the category, and press
select the channel within the selected category.
• "LOADING" is displayed while receiving the channel or information.
• "UPDATING" is displayed while updating encryption code.
• When the selected channel is not available, "XM – – –" is displayed.
• Information on the artist name, song title, category and signal level
can be checked using STATUS.
• The XM Satellite Radio channels can be preset in the same way as
AM/FM band.
• In addition to AM/FM band presetting, a total of 56 stations can be
preset.
• "XM" can be selected directly by pressing XM RADIO.
XM RADIO 1
.
2
Channel name
Song title / Artist name
Channel category
[D D H H ]
to 3
16
ENGLISH

Direct access of channels

[SEARCH]
Press in the XM mode.
X M___
DIRECT SEARCH
[NUMBER]
Press to enter the desired channel.
For example, if you want to access channel 123 (ex.XM123)
press [NUMBER] as shown below.
X M 0 0 1
DIRECT SEARCH
X M 0 1 2
DIRECT SEARCH
X M 1 2 3
DIRECT SEARCH
(Remote control unit)
Once all number have been input, press
change the channel.
If the next [NUMBER] is not pressed within several seconds, the
channel automatically switches to the channel number that was
input.
ENGLISH
Operation
ENTER
to