Volkswagen golf 2006 Work Description

Volkswagen golf 2006 Work Description

Hide thumbs Also See for golf 2006:
Table of Contents

Advertisement

Volkswagen Golf 5 - Description of work

General

Lifting the vehicle using vehicle hoist and workshop
trolley jack

Safety precautions

Warning!
Before driving on to a hoist ensure there is
sufficient clearance between low lying vehicle
components and hoist.
Before driving a vehicle onto a lifting platform it
must be ensured that the vehicle weight does
not exceed the permissible lifting capacity of the
platform.
Vehicle may only be lifted at points indicated in
illustration in order to avoid damaging vehicle
floor pan and to prevent vehicle from tipping.
Never start engine and engage a gear with
vehicle lifted so long as even one wheel has
contact with the floor. There is a risk of an
accident if this is not observed!
If work is to be performed under vehicle it must
be supported by suitable stands.

Lifting points for lifting platform and trolley jack:

Front:
Page 1 / 10
3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the golf 2006 and is the answer not in the manual?

Questions and answers

Summarization of Contents

General Vehicle Operations
Lifting the vehicle using vehicle hoist and workshop trolley jack
Instructions for lifting the vehicle with hoist and trolley jack.
Safety precautions
Critical safety measures to prevent accidents during lifting operations.
Data stickers
Details on applying and interpreting vehicle data stickers for service.
Diagnostic unit, connecting
Procedure for connecting diagnostic equipment for vehicle checks.
Vehicle Identification Number (VIN)
Information on locating and understanding the Vehicle Identification Number.
Vehicle Maintenance Procedures
Battery, check battery terminals for secure seating
Inspecting battery terminals for proper connection and security.
Check tires, condition, tire tread, filling pressure, tread depth
Procedures for checking tire wear, tread depth, and inflation pressure.
Brake and clutch systems, changing fluid
Information and procedures for changing brake fluid and checking levels.
Cooling system, freeze protection and coolant level, checking
Checking coolant level and ensuring adequate freeze protection.
Engine oil, check
Procedures for checking engine oil level.
Oil filter, replacing
Procedure for replacing the engine oil filter.
Vehicle Operation and Testing (Part 2)
Perform test drive
Guidelines for conducting a road test to evaluate vehicle performance.
Tire pressure control indicator, performing basic setting
Performing the initial basic setting for the tire pressure monitoring system.
Headlight adjustment procedures
Checking and adjusting headlights, fog lights, and auxiliary lights.
Service interval display reset and recoding
Resetting and recoding the service reminder indicator for maintenance intervals.
Transportation mode deactivation
Steps to deactivate the vehicle's transportation mode using diagnostic tools.
Airbag system visual inspection
Performing a visual check of driver and passenger airbag components for damage.
Spark plugs replacement
Procedure for removing and replacing spark plugs in the engine.

Table of Contents

Save PDF