Satellite Receiver; Connecting The Recording Components; Digital Video Recorder - Denon AVR-988 Owner's Manual

Satellite Receiver

Connect the cables to be used.
DBS / BS tuner
• When using a coaxial digital cable for the digital audio connection, make the settings at menu "Input
Setup" – "Assign" – "Digital In" (vpage 35).
• When using a component video cable for the video connection, make the settings at menu "Input Setup"
– "Assign" – "Component In" (vpage 35).

L R
L R

Connecting the Recording Components

Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.

Digital Video Recorder

Connect the cables to be used.
Digital video recorder
or
• Make analog connections if you wish to record analog audio signals.
• When recording via the AVR-988, the playback device's cable must be of the same type as the cable used
to connect the AVR-988's DVR OUT connector.
Example: TV IN → S-Video cable : DVR OUT → S-Video cable
TV IN → Video cable : DVR OUT → Video cable
• When using a component video cable for the video connection, make the settings at menu "Input Setup"
– "Assign" – "Component In" (vpage 35).
NOTE
Do not connect the output of the component connected to the AVR-988's OPTICAL2 output connector to
any input connector other than OPTICAL2.
L R L R
or
L R L R