Denon AVR-988 Owner's Manual
  1. Manuals
  2. Brands
  3. Denon Manuals
  4. Receiver
  5. AVR-988
  6. Owner's manual

Denon AVR-988 Owner's Manual

Denon owner's manual av surround receiver avr-988
Hide thumbs Also See for AVR-988:
Table of Contents

Advertisement

Quick Links

See also: Code List , Service Manual
AV SURROUND RECEIVER
AVR-988
Owner's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVR-988 and is the answer not in the manual?

Questions and answers

Related Manuals for Denon AVR-988

Summary of Contents for Denon AVR-988

  • Page 1 AV SURROUND RECEIVER AVR-988 Owner’s Manual...

  • Page 2: Safety Instructions

    SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 3 2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product. 3. NOTE This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 4: Table Of Contents

    Contents Getting Started Accessories ······················································································2 Cautions on Handling ·····································································3 Cautions on Installation ·································································3 About the Remote Control Unit ····················································3 Inserting the Batteries ····································································3 Operating Range of the Remote Control Unit ································3 Part Names and Functions ·····························································4 Front Panel ·····················································································4 Display ···························································································4 Rear Panel ······················································································5 Remote Control Unit ······································································6 Connections...

  • Page 5: Getting Started

    Specifications ··············································································· 71 List of preset codes ··········································· End of this manual Getting Started Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference.

  • Page 6: Cautions On Handling

    Note Wall About the Remote Control Unit In addition to the AVR-988, the included remote control unit (RC-1069) can also be used to operate the equipment listed below. q DENON system components w Non-DENON system components •...

  • Page 7: Part Names And Functions

    Part Names and Functions For buttons not explained here, see the page indicated in parentheses ( ). Front Panel GWith the door openH Headphones jack (PHONES) ······················ (43) ZONE2 ON/OFF button ······························ (58) INPUT MODE button ·································· (34) MENU button ·············································· (20) Cursor buttons (uio p) ··························...

  • Page 8: Rear Panel

    Rear Panel RS-232C connector ····································· (19) AC OUTLETS ··············································· (20) REMOTE CONTROL jacks··························· (19) Digital audio connectors (OPTICAL / COAXIAL) ·························· (12, 15) TRIGGER OUT jacks ··································· (19) COMPONENT VIDEO connectors ·············· (12) DOCK CONTROL jack ································· (14) XM connector (SAT TU) ······························ (18) Speaker terminals (SPEAKERS) ··················...

  • Page 9: Remote Control Unit

    Remote Control Unit n Front Indicator ······················································ (51) Power buttons············································· (43) Tuner system buttons ································ (44) Source select buttons ································ (43) System buttons ·····································(47 , 52) RESTORER button ······································ (40) Cursor buttons (uio p) ························· (20) AUDIO DELAY button ································· (41) SPEAKER button ·········································...

  • Page 10: Connections

    Please select the types of connections suited for the equipment you are connecting. With some types of connections, certain settings must be made on the AVR-988. For details, refer to the instructions for the respective connection items below. NOTE •...

  • Page 11: Video Conversion Function

    • When viewing HDMI or component video signals via the AVR-988, the on-screen display appears when S-Video connector the MENU button is operated. • When only HDMI or component video signals are input to the AVR-988, the characters of the on-screen display are not displayed over the picture. Video connector...

  • Page 12: Speaker Connections

    When using just one surround back speaker, connect it to the left channel (SBL). NOTE By default, the AVR-988’s “Amp Assign” setting is set to “ZONE2” . To use as the surround back speaker for the main zone, change the “Amp Assign” setting (vpage 30).
  • Page 13 If the protection circuit is activated again even though there are no problems in the ventilation around the set nor in the connections, the set may be damaged. Turn the power off, then contact a DENON service center.

  • Page 14: Connecting Equipment With Hdmi Connectors

    2/5.1ch 2.8224 MHz SACD • When the AVR-988 and DVD player are connected using an HDMI cable, also connect the AVR-988 and monitor using an HDMI cable. 1 bit • If the connected monitor or DVD player only has a DVI-D connector, use an HDMI/DVI converter cable.

  • Page 15: Connecting The Monitor

    Connecting the Monitor • Connect the cables to be used (vpage 8 “Video Conversion Function”). • With HDMI connections, the video and audio signals can be transferred with a single cable. • To output the audio signals to the monitor with HDMI connections, set menu “Manual Setup” – “HDMI Setup”...

  • Page 16: Record Player

    • With some record players, noise may be generated when the ground wire is connected. If so, disconnect the ground wire. NOTE The AVR-988’s SIGNAL GND terminal is meant to reduce noise when a record player is connected. This is not a safety ground terminal. CD Player Connect the cables to be used.

  • Page 17: Ipod

    ® Use a DENON Control Dock for iPod (ASD-1R, sold separately) to connect the iPod to the AVR-988. For instructions on the Control Dock for iPod settings, refer to the Control Dock for iPod’s operating instructions. iPod • With the default settings, the iPod can be used connected to the VCR (iPod) connector.

  • Page 18: Satellite Receiver

    Digital video recorder • Make analog connections if you wish to record analog audio signals. • When recording via the AVR-988, the playback device’s cable must be of the same type as the cable used to connect the AVR-988’s DVR OUT connector.

  • Page 19: Video Cassette Recorder

    Connect the cables to be used. Video cassette recorder • When recording via the AVR-988, the playback device’s cable must be of the same type as the cable used to connect the AVR-988’s VCR OUT connector. Example: TV IN → S-Video cable : VCR OUT → S-Video cable TV IN →...

  • Page 20: Connections To Other Devices

    (vpage 34). • The video signal can be connected in the same way as a DVD player (vpage 12). • To play copyright-protected discs, connect the AVR-988’s EXT. IN connector with the DVD player’s analog multi-channel output connector. External Power Amplifier...

  • Page 21: Xm Connector

    XM connector ® • The AVR-988 is an XM Ready receiver. You can receive XM Satellite Radio by connecting to the XM Mini-Tuner and Home Dock (includes home antenna, sold separately) and subscribing to the XM service. • Plug the XM Mini-Tuner and Home Dock into the XM connector on the rear panel.

  • Page 22: Multi-Zone

    ZONE2 the same time (vpage 55 ~ 58). • When using an S-Video cable or a video cable for connection between the AVR-988 and an input device, connect to the video connectors.

  • Page 23: Connecting The Power Cord

    Once Connections are Completed Turning the Power On (vpage 43) Menu Operations With the AVR-988, settings and operations for most functions can be performed by operating while looking at the menus displayed on the monitor screen. MENU uiop To household...

  • Page 24: Example Of Display Of Default Values

    Example of Display of Default Values In lists of selectable items or adjustable ranges, the item surrounded by a border is the default value. B A + B [Selectable items] Examples of On-screen Display and Front Display Some typical examples are described below. GFront displayH *MENU Auto Setup...

  • Page 25: Menu Map

    Menu Map MENU 1.Auto Setup 2.Manual Setup 3.Input Setup 4.Parameter 5.Information Information Parameter (vpage 41, 42) (vpage 38 ~ 41) n Status n Surround Parameter • MAIN ZONE • MODE • ZONE2 • CINEMA EQ n Audio Input Signal • D.COMP n HDMI Information •...

  • Page 26: Auto Setup

    Auto Setup • Audyssey MultEQ ® XT automatically measures the acoustical problems in the listening environment to create the best audio experience for your home theater. • It optimizes a large listening area where one or more listeners are seated. Measurements are performed by placing the calibrated microphone (DM-A405) successively at multiple positions throughout the listening area as shown in Example q.

  • Page 27: Auto Setup

    (subwoofers, etc.). This is because fi lters add electrical delay to the signal that should be compensated. Step 5 : Store The auto setup measurement results are stored in the AVR-988. NOTE Do not turn the power off while the settings are being stored.

  • Page 28: Error Messages

    Error Messages If the auto setup procedure could not be completed due to speaker installation, the measuring environment, etc., an error message is displayed. If this happens, check the relevant items, be sure to take the necessary measures, then perform the auto setup procedure over again.

  • Page 29: Manual Setup

    None 2spkrs 1spkr NOTE By default, the AVR-988’s “Amp Assign” setting is set to “ZONE2” . To use as the surround back speaker for the main zone, change the “Amp Assign” setting (vpage 30). Large : Select this when using large speakers with ample low frequency reproduction capabilities.

  • Page 30: Channel Level

    Distance measurement Select the speaker you want to set, then set the distance. Set the value closest to the measured distance. [Variable range] 0.0ft ~ 60.0ft : Display when “Feet” is set. 0.00m ~ 18.00m : Display when “Meters” is set. NOTE Set the distance between the listening position and the various speakers to no more than 20.0 ft (6.00 meters).

  • Page 31: Hdmi Video Setup

    s HDMI Video Setup Make settings for HDMI video output. i/p Scaler Make settings for i/p scaler function. [Selectable items] A to H : Use i/p scaler function for analog video signal. : Do not use i/p scaler function. Resolution Make settings for resolution of HDMI video output signal.

  • Page 32: Dolby Digital Setup

    Front Select front speaker size. [Selectable items] Large Small : Select front speaker size. Subwoofer Select subwoofer use. [Selectable items] : Select subwoofer use. Subwoofer Mode Select low range signal to be reproduced by subwoofer. [Selectable items] LFE+Main : Select subwoofer signal. Crossover Select crossover frequency from which subwoofer handles low range signal.

  • Page 33: Zone2 Setup

    ZONE2 Setup Make settings for audio playback in a ZONE2 system. F Menu screen F 2.Manual Setup 2-4.Zone2 Setup 1.Speaker Setup 2.HDMI Setup Level Lch 3.Audio Setup 4.Zone2 Setup Vol.Level : VAR 5.Option Setup Vol.Limit : OFF Power On Lev.: Last Mute Lev.

  • Page 34: Volume Control

    s Volume Control Set the main zone volume setting. Volume Limit Make a setting for maximum volume. [Selectable items] : Do not set a maximum volume. –20dB : Set the maximum volume to –20 dB. –10dB : Set the maximum volume to –10 dB. : Set the maximum volume to 0 dB.

  • Page 35: Trigger Out

    Set remote control ID. [Selectable items] NOTE When using the AVR-988 with only the included remote control unit (RC-1069), there is no need to make settings. When using a separately sold remote control unit (RC-7000CI, etc.), this function can be used. Match the ID setting of the remote control unit and the receiver.

  • Page 36: Input Setup

    Input Setup Use this procedure to select the input source and make the settings related to playing input sources. n TUNER (AM/FM) This menu is for “TUNER” . F Menu screen F 3.Input Setup T U N E R 1.Auto Preset 2.Preset Skip 3.Preset Name 4.Input Mode...

  • Page 37: Input Mode

    “HDMI” together with the audio signal assigned at “Digital In” , set “Input Mode” on the menu to “DIGITAL ”. • When the AVR-988 and monitor are connected with an HDMI cable, if the monitor is not compatible with HDMI audio signal playback, only the video signals are output to the monitor.

  • Page 38: Ipod

    • With the default settings, the Control Dock for iPod can be used connected to the VCR (iPod) connector. • Even if “iPod dock” is set to “Assign” , if the AVR-988 is not connected to a Control Dock for iPod, the input source can be used as the normal input source.

  • Page 39: Antenna Aiming

    MULTI CH IN 7 .1 z1 : This is displayed when the input signal is “DTS-ES Matrix 6.1” and the AVR-988’s “AFDM” setting is set to “ON” . z2 : This is displayed when the input signal is “DTS-ES Discrete 6.1”...

  • Page 40: Dsp Simulation Playback

    DSP Simulation Playback The desired mode according to the program source and viewing situation can be selected from among 10 DENON original surround modes. The surround parameters can be adjusted (vpage 62, 63) to achieve an even more realistic, powerful sound field.

  • Page 41: Parameter

    Parameter F Menu screen F 4.Parameter 1.Surround Parameter 2.Tone Control 3.Room EQ 4.RESTORER 5.Night Mode 6.Audio Delay a Surround Parameter Adjust surround sound parameters. The adjustable parameters differ for the different surround modes (vpage 62, 63). MODE Select the mode according to the playback source. n In the PLgx or PLg mode [Selectable items] CINEMA MUSIC GAME z: Can be selected in the PLg mode.
  • Page 42 EFFECT Switch effect signal for multi-surround speakers on and off. When “EFFECT” is set to “ON” , a surround effect with a strong sense of expansion is achieved. [Selectable items] LEVEL Adjust effect signal level. [Variable range] ~ 15 Set to a lower level if the positioning and sense of phase of the surround signals seems unnatural.

  • Page 43: Control Unit

    s Tone Control Adjust the tonal quality of the sound. Tone Defeat Turn tone adjustments off. [Selectable items] : Playback without tone adjustment. : Allow tone adjustment (treble, bass). The tone cannot be adjusted when in the DIRECT mode. Bass Adjust low frequency range (bass).

  • Page 44: Night Mode

    g Night Mode Optimized setting for late-night listening. [Selectable items] : Turn night mode off. : Low setting. : Middle setting. HIGH : High setting. Operating from the remote control unit Press the NIGHT button. The “ ” indicator lights when “LOW” , “MID” or “HIGH” is selected.

  • Page 45: Hdmi Information

    HDMI Information Shows information about HDMI input/output signals and monitor. F Menu screen F 5.Information 5-3.HDMI Signal Info. 1.Status 2.Audio Input Signal Resolution 3.HDMI Information 480p 4.Auto Surround Mode 5.Quick Select Color Space 6.Preset Station RGB 4:4:4 Pixel Depth 8bits 5-3.HDMI Monitor Info.

  • Page 46: Playback

    SOURCE SELECT <SOURCE> <TUNING PRESET> MASTER VOLUME <ON/STANDBY> <PHONES> SPEAKER <POWER> [POWER ON] [CHANNEL] [POWER OFF] [SHIFT] [TUNER] [TUNER] SOURCE SOURCE SELECT SELECT [TUNING] MASTER [MODE] VOLUME [BAND] [MUTING] [MEMORY] SPEAKER [MODE SELECTOR 1] [MODE SELECTOR 2] About the button names in these explanations <...

  • Page 47: Playing Video And Audio Equipment

    Playing Video and Audio Equipment Basic Operation Prepare the equipment. q Load the DVD, CD or other software in the player. (vSee the operating instructions of the respective devices.) w To play a video device, switch the monitor input. (vSee the monitor’s operating instructions.) SOURCE SELECT to select the input source.

  • Page 48: Listening To Xm Satellite Radio Programs

    <SOURCE SELECT> <STATUS> uiop [SAT TU] [SAT TU] [TUNING] uiop uiop [MODE SELECTOR 1] About the button names in these explanations < > : Buttons on the main unit : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit Listening to XM Satellite Radio Programs ABOUT XM RADIO...

  • Page 49: Checking The Xm Signal Strength And Radio

    Checking the XM Signal Strength and Radio ID <SOURCE SELECT> [SAT TU] Either turn or press select “XM”. <STATUS> Press until “SIGNAL” appears on the display. The display will switch as shown below, depending on the reception conditions. Display Status GOOD Signal strength is good Signal strength is marginal...

  • Page 50: Ipod ® Playback

    Basic Operation Make the necessary preparations. q S et the iPod in the DENON Control Dock for iPod. (vSee the Control Dock for iPod’s operating instructions.) w Assign the Control Dock for iPod’s input. MENU : ”Input Setup”...

  • Page 51: Viewing Still Pictures Or Videos On The Ipod

    • The title name, artist name and album name can be checked by pressing <STATUS> during playback. • On the AVR-988, folder and fi le names can be displayed as titles. Any characters that cannot be displayed are replaced with “ . (period)” .

  • Page 52: Recording On An External Device (Rec Out Mode)

    <STANDARD> <SOURCE SELECT> <DSP SIMULATION> <POWER> CH SELECT <QUICK SELECT> <ZONE2 / REC SELECT> uiop uiop CH SELECT uiop About the button names in these explanations < > : Buttons on the main unit : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit Recording on an External Device...

  • Page 53: Convenient Functions

    Convenient Functions Channel Level You can adjust the channel level either according to the playback sources or to suit your taste, as described below. CH SELECT Press Channel Volume 0.0dB 0.0dB 0.0dB SBR 0.0dB 0.0dB SBL 0.0dB 0.0dB SL 0.0dB Fader FRONT : REAR CH SELECT...

  • Page 54: Remote Control Unit Operations

    Presetting • DENON and other makes of components can be operated by setting the preset memory. • This remote control unit can be used to operate components...
  • Page 55 Functions of Buttons by Component n Front [OFF] [ON/SOURCE] [SHIFT] [CHANNEL+/–] [1], [2], [3], [A/B], [0], [DISC SKIP +/ FAVORITE], [6 7], [SETUP], [uiop], [8 9], [AUDIO], [ENTER], [VCR CH+/–], [DISPLAY], [RETURN], [MENU] [MODE [MODE SELECTOR 1] SELECTOR 2] Device CD Player iPod operated...
  • Page 56 DISPLAY – – – – RETURN – – – – Default DENON DENON setting – – (111) (151) (Preset code) Special – Remarks GSpecial RemarksH q Only one device can be set in the preset memory for each mode. Also, when a new code is preset, the previous code is automatically deleted.

  • Page 57: Punch Through Function

    [1], [2], [3], [6], [7], [8], [9] [MODE SELECTOR 1] [MODE SELECTOR 2] [NUMBER] [MEMORY] [RETURN] Punch Through Function “Punch Through” is a function allowing you to operate 1, 2, 3, 6, 7, 8 and 9 on CD, TAPE, CD-R/MD, DVD/VDP or VCR components when in the DBS/CABLE or TV mode.

  • Page 58: Amp Assign / Multi-Zone Connections And Operations

    Multi-zone Settings with the Amp Assign Function The amp assign function lets you assign the amplifiers for the different channels built into the AVR-988 to the speaker outputs for the different zones. Select the desired playback environment from among “Setting 1” to “Setting 4” , then set the corresponding “Amp Assign”...
  • Page 59 Setting 2 : 7.1-channel playback Main zone FL SW Amp Assign mode: 7 .1ch 7 .1ch n Amp Assign mode setting and speakers connected to the various speaker terminals Speaker terminal FRONT CENTER Amp Assign mode 7 .1ch Setting 3 : With this setting it is possible to switch between the following two playback modes.

  • Page 60: Multi-Zone Settings And Operations With Zone Pre-Out Output

    FL -A/FR-A Bi-Amp connection FL -B/FR-B Bi-Amp connection Audio signals Connectors for video output Stereo ZONE2 VIDEO OUT ZONE2 Monitor Monitor Power amplifier ZONE2 AVR-988 video output Input ZONE2 audio output : Multi-zone video cable : Multi-zone audio cable...

  • Page 61: Multi-Zone Operations

    <ZONE2/REC SELECT> SOURCE SELECT VOLUME <ZONE2 ON/OFF> [ZONE2 OFF] [ZONE2 ON] [MAIN ON] [MAIN OFF] SOURCE SELECT SOURCE SELECT VOLUME [MUTING] [MODE SELECTOR 1] [MODE SELECTOR 2] About the button names in these explanations < > : Buttons on the main unit : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit...

  • Page 62: Other Information

    Other Information About Speaker Installation Surround back speakers Sound positioning directly to the rear can be achieved easily by adding a surround back speaker to a 5.1-channel system. In addition, the acoustic image extending between the sides and the rear is narrowed, thus greatly improving the expression of the surround signals for sounds moving from the sides to the back and from the front to the point directly behind the listening position.

  • Page 63: Dolby Surround

    G As seen from the side H Surround The AVR-988 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater.

  • Page 64: Audyssey Multeq ® Xt

    Audyssey Laboratories, Inc. All rights reserved. AL24 Processing Plus AL24 Processing for All Channels DENON has further developed its proprietary AL24 Processing, an analog waveform reproduction technology, to support the 192-kHz sampling frequency of DVD-Audio. AL24 Processing Plus, thoroughly...

  • Page 65: Surround Modes And Parameters

    Surround Modes and Parameters Signals and adjustability in the different modes Channel output Surround mode Surround Surround Front L/R Center Back L/R PURE DIRECT, DIRECT DSD DIRECT DSD MULTI DIRECT MULTI CH DIRECT STEREO EXT. IN MULTI CH IN WIDE SCREEN DOLBY PRO LOGIC gx DOLBY PRO LOGIC g DTS NEO:6...
  • Page 66 Surround mode MODE ROOM SIZE LEVEL PURE DIRECT, DIRECT DSD DIRECT DSD MULTI DIRECT MULTI CH DIRECT STEREO EXT. IN MULTI CH IN WIDE SCREEN S (ON, 10) DOLBY PRO LOGIC gx S (CINEMA) DOLBY PRO LOGIC g S (CINEMA) DTS NEO:6 S (CINEMA) DOLBY DIGITAL...
  • Page 67 Differences in Surround Mode Names Depending on the Input Signals Button Note Surround mode ANALOG STANDARD DTS SURROUND DTS ES DSCRT6.1 DTS ES MTRX6.1 DTS SURROUND DTS 96/24 DTS + PLgx CINEMA DTS + PLgx MUSIC DTS + NEO:6 DTS NEO:6 CINEMA DTS NEO:6 MUSIC DOLBY SURROUND DOLBY DIGITAL EX...
  • Page 68 Button Note Surround mode ANALOG DIRECT DIRECT DSD DIRECT DSD MULTI DIRECT MULTI CH DIRECT M DIRECT + PLgx CINEMA M DIRECT + PLgx MUSIC M DIRECT 7 .1 PURE DIRECT PURE DIRECT DSD PURE DIRECT DSD MULTI PURE MULTI CH PURE DIRECT M PURE D + PLgx CINEMA M PURE D + PLgx MUSIC M CH PURE DIRECT 7 .1...

  • Page 69: Relationship Between Video Signals And Monitor Output

    Relationship Between Video Signals and Monitor Output Input signals Video convert HDMI COMPONENT S-VIDEO S (1080p) S (480p ~ 720p) S (480i / 576i) S (1080p) S (480p ~ 720p) S (480i / 576i) S (1080p) S (480p ~ 720p) S (480i / 576i) S (1080p) S (480p ~ 720p)
  • Page 70 S-VIDEO Input signals Video convert MONITOR OUT HDMI COMPONENT S-VIDEO — — — Used Not used — — — Used Not used — — — Used Not used — — — Used Not used S : Signal input A : No signal n ZONE2 monitor out Input Monitor out...

  • Page 71: Troubleshooting

    • Set is damaged. • Turn off the power and contact a DENON service center. Cause Countermeasure • Batteries are worn. • Replace with new batteries. • You are operating outside of the •...
  • Page 72 • DVD player is not compatible • Use a DTS-compatible player. with DTS sound playback. • The AVR-988’s “Decode Mode” • Set to the “Auto” or “DTS” setting is set to “PCM” . mode. HDMI audio • The “Manual Setup” – “HDMI •...
  • Page 73 AC adapter into a power outlet. power outlet. GXM Satellite RadioH Symptom Cause ”CHECK • AVR-988’s XM connector and the • Check that the connections are ANTENNA” is XM Mini-Tuner and Home Dock correct. displayed in the is not properly connected.

  • Page 74: Specifications

    Specifications Audio section • Power amplifier Rated output: Front (A, B): 110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
  • Page 75 List of preset codes / Liste de codes préréglés DVD Player Curtis Mathes Cybernex Aiwa Denon 014, [111] Daewoo Hitachi Daytron 006, 011 Konka 012, 013 Dumont Magnavox Dynatech Mitsubishi Electrohome Panasonic Electrophonic Philips 005, 015, 016, 017 Pioneer 003, 008...
  • Page 76 011, 012, 013, 018, 021 002, 003, 022 Aiwa 001, 035, 043 Burmster Carvery 003, 035 014, 023 [111]*, 044 Denon 004, 024, 025 Emerson 004, 005, 006, 007 Fisher 003, 008, 009, 010 018, 019 Kenwood 011, 012, 013, 014, 017 DVD preset codes / Codes préréglés DVD...
  • Page 80 TOKYO, JAPAN Denon Brand Company, D&M Holdings Inc. www.denon.com Printed in Japan 00D 511 4667 101...

Table of Contents

Save PDF