Related Manuals for Toro 33516
Summarization of Contents
Safety
Safe Operating Practices
Guidelines for safe operation, including training and preparation.
Slope Indicator
Chart to determine safe operating slopes for the machine.
Safety and Instructional Decals
Explanation of safety symbols and important decals on the machine.
Setup
Unfolding the Handle
Instructions for raising and securing the machine's handle.
Pre-Operation Checks
Essential checks before starting the machine, including oil level.
Controls
Engine Switch
Description of the engine start/stop switch function.
Recoil-start Handle
Instructions on how to start the engine using the recoil starter.
Fuel Valve Operation
How to operate the fuel valve for starting and stopping.
Throttle Lever Operation
Adjusting engine speed for starting and operation.
Traction Control Bail
Controls forward and neutral movement of the machine.
Tine Control Lever
Engages and disengages the aerating tines.
Operation
Checking Engine Oil Level
Procedure for checking and adding engine oil before each use or daily.
Filling the Fuel Tank
Instructions and safety precautions for refueling the machine.
Starting the Engine
Step-by-step guide for starting the aerator's engine.
Stopping the Engine
Procedure for safely shutting down the engine.
Driving the Machine
How to move the aerator forward and steer it.
Aerating Operation
Engaging the tines and performing the aeration process.
Adding Weight to the Machine
How to add weight for improved tine penetration.
Adjusting Coring Depth
Procedure for changing the depth of tine penetration.
Securing for Transport
Instructions for safely securing the machine on a trailer.
Operating Tips
Advice for optimal performance and avoiding obstacles.
Maintenance
Maintenance Schedule
Schedule for routine maintenance tasks based on operating hours.
Premaintenance Procedures
Essential steps before performing any maintenance on the machine.
Disconnecting Spark-plug Wire
Safety procedure to prevent accidental engine start during maintenance.
Accessing the Tines
How to access the tines for inspection or replacement.
Lubrication
Lubricating the Drive Chain
Procedure for lubricating the drive chain.
Tipping the Machine
Instructions on how to safely tip the machine for access.
Engine Maintenance
Servicing the Air Cleaner
Procedure for cleaning or replacing the air filter.
Drive System Maintenance
Checking Tire Pressure
Procedure for checking and maintaining tire inflation.
Checking Drive Chain Tension
How to check and adjust the tension of the drive chain.
Belt Maintenance
Checking and Adjusting Belt Tension
Procedure for checking and adjusting drive belt tension.
Tine Maintenance
Checking and Replacing Tines
How to inspect tines for wear/damage and replace them.
Storage
Removing from Storage
Steps to prepare the machine for use after storage.
Need help?
Do you have a question about the 33516 and is the answer not in the manual?
Questions and answers