Input Setup; A, S Hdmi In Assign; D ~ H Digital In Assign - Denon AVR-1708 Owner's Manual

ENGLISH
Operating from the main remote control unit
Adjusting with the main remote control unit using the test tones is
only possible in the "Auto" mode and only effective in the STANDARD
mode. The adjusted levels for the different modes are automatically
stored in the memory.
GAdjusting using test tonesH
q Press the TEST button.
Test tones are output from the various speakers.
w Use the o p button to adjust so that the volume is equal for all
speakers.
e When the adjustments are completed, press the TEST button.
• When "System Setup" – "Speaker Setup" – "Surround Back
Speaker" setting (vpage 23) is set to "1spkr" , the surround back
speaker display is "SB" .
• Speakers set to "None" in the Speaker Configuration settings are not
displayed.
• When "Channel Level" is adjusted, the adjusted values are set for
all the surround modes. To adjust the channel level separately for the
different surround modes, use the operation see page 41.

Input Setup

Use this procedure to select the input source and make the settings
related to playing input sources.
HDMI In Assign
a, s

d ~ h Digital In Assign

iPod Assign
j
k ~ A0 Component In Assign
A1 ~ A4 Video Convert
Audio Delay
A5
EXT. IN Subwoofer Level
A6
Auto Preset Memory
A7
A8 Antenna Aiming
 

a, s HDMI In Assign

Select HDMI connector to assign to this source.
[Display]
1 . S p 2 . I n 3 . O p
I n p u t S e t u p
1 H D M I 1 D V D
2 H D M I 2 T V
[Input terminals] HDMI1 HDMI2
[Assignable input sources]
DVD/HDP TV/CBL VCR V.AUX
Input terminals HDMI1
Default setting DVD/HDP
• With HDMI, the video and audio signals are transferred
simultaneously. (The HDMI audio signal is output from the monitor.)
At this time, set the input mode to "Auto" .
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the monitor.
d ~ h Digital In Assign
Select digital input connector to assign to this source.
[Display]
1 . S p
W
I n p u t S e t u p
W
W
[Input terminals]
[Assignable input sources]
CD AUX CDR DVD/HDP
HDMI2
TV/CBL
Input terminals
Default setting
Operations (vpage 22)
2 . I n 3 . O p
W
W
3 C O A X 1 D V D
W
5 O P T 1 C D
COAXIAL1 COAXIAL2
OPTICAL1 OPTICAL2
TV/CBL VCR V.AUX
COAXIAL1 COAXIAL2 OPTICAL1 OPTICAL2
DVD/HDP TV/CBL CD VCR