US Robotics 56K USB MODEM - QUICK INSTALLATION GUIDE REV 2.0 Quick Installation Manual page 9

8. The PWR LED on the modem will light.
Congratulations.
Please register your 56K USB Modem at www.usr.com/productreg/.
Linux Kernel 2.4.20 or Higher
You need a USB modem driver (CDC ACM) compiled into a Linux kernel 2.4.20
or higher or as a loadable module for your kernel. Installation of the modem
under these kernels is fully automatic provided your kernel has the Plug and Play
module enabled (default). You do not need to install any drivers off the USRobot-
ics installation CD-ROM.
Congratulations.
Please register your 56K USB Modem at www.usr.com/productreg/.
Mac OS X 10.4.3 or Later
1. Insert the USRobotics Installation CD-ROM into your CD-
ROM drive.
2. Go to Finder and double-click the CD icon.
3. Double click USRobotics 56K USB Modem.pkg to launch
the installer, and follow the on-screen instructions.
4. Go to Apple > System Preferences > Network. If prompted, click OK.
5. Select USB Modem
6. Select the Modem tab.
7. Scroll through the Modem list, select USRobotics 56K USB Modem and
click Apply Now.
The PWR LED on the modem may not light until you initiate a connection
to your Internet service provider (ISP).
Congratulations.
Please register your 56K USB Modem at www.usr.com/productreg/.
Additional Software
You can now install any of the additional software on the USRobotics Installation
CD-ROM, including optional software that complements your modem and pro-
vides full V.92 features.
You have successfully completed the installation procedure.
You have successfully completed the installation procedure.
from the
Show
You have successfully completed the installation procedure.
menu
.
English
5