Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Thermal Edge NE030
Summarization of Contents
Overview and Initial Setup
Technical Support Information
Provides contact details and hours for technical assistance.
Inspecting the Equipment Upon Receipt
Instructions for checking the air conditioner for damage after delivery.
Unpacking the Air Conditioner
Guidelines for safely removing the air conditioner from its packaging.
Operation and Preliminary Testing
Operation of Thermal Edge Air Conditioners
Describes how the air conditioners cool and dehumidify enclosures.
Preliminary Testing Procedures
Steps for testing the unit's function before mounting.
Product Options and Features
Built-in Heater Functionality
Details the integrated heater for increased enclosure temperature in low conditions.
Low Ambient Operating Circuitry
Explains circuitry protecting the compressor in low ambient temperature environments.
Dry Contact Alarm Capability
Provides early warning for high temperature limits via a dry contact output.
Celsius Programming Option
Enables control of the air conditioner using SI units.
External Heater Output
Allows adding external heaters for focused heating in enclosure sections.
Special Programming Configuration
Allows pre-programmed settings for specific requirements at manufacturing.
High Ambient Application Upgrade
Optimizes performance for high ambient conditions during manufacturing.
Open Door Kill Switch Safety
Disables power to the unit when the enclosure door is open for safety.
Adjustable Temperature Probe
Provides a 12' probe for monitoring temperature at specific enclosure locations.
Ethernet/IP Controller Output
Enables remote monitoring and control via Ethernet/IP protocol.
Outdoor Option Controller
Moves the controller inside the enclosure with a separate mounting bracket.
Digital Temperature Controller Programming
Functions and Parameters Overview
Details controller functions, parameters, factory defaults, and operating ranges.
Alarms and Recovery Procedures
Explains alarm signals, causes, outputs, and recovery logic.
Preventative Maintenance
Air Filter Service and Cleaning
Instructions for cleaning or replacing the air conditioner filter.
Condenser and Evaporator Fan Maintenance
Guidance on maintaining the unit's cooling fans for optimal performance.
Compressor Maintenance and Overloads
Information on the hermetically sealed compressor and its thermal overload.
Loss of Refrigerant Procedures
Steps for addressing refrigerant leaks and system recharging.
Electrical Schematics
System Schematic Diagram
Illustrates the main electrical connections of the air conditioner unit.
Digital Controller Schematic
Details the wiring and connections for the digital temperature controller.
Return Material Authorization (RMA) Procedure
Out of Warranty Repair Process
Procedure for requesting repair services for units out of warranty.
Appendix A: Power Connector Instructions
Phoenix Contact Power Connector Wiring
Instructions for connecting power wires to the Phoenix Contact connector.
Need help?
Do you have a question about the NE030 and is the answer not in the manual?
Questions and answers