Removing A Virtual Device; Changing A Print Queue To Print To A Different Printer; Removing A Print Queue - Lexmark Dot Matrix Manual

Notes:
•
You cannot modify a virtual device from the command line.
•
You cannot change a virtual device type after creation. If you need to do this, delete the existing device and then
re-create it.

Removing a virtual device

1
Click Device Manager.
2
Select the virtual devices you want to remove.
3
Click Remove.
Note: A virtual device cannot be removed if a print queue is currently associated with it. A notification message
appears if you try to remove a device that has queues associated with it.
You can also remove a virtual device from the command line using the following command:
# /usr/lexprint/bin/rmdevice -d device_name

Changing a print queue to print to a different printer

1
Open the printer driver.
2
Right-click the print queue icon.
3
Select Change Device.
4
Select a device from the Device Manager table.
If you do not see your printer listed in the table, you can create a new virtual device by clicking Add Device.
5
Click OK.
Note: You cannot change a print queue's virtual device from the command line.

Removing a print queue

From the icon view
1
Right-click the icon for the printer you want to delete.
2
Select Delete.
From the detail view
1
Select any number of the print queues listed in the table that you want to delete.
2
Right-click, and then select Delete.
From the printer driver
1
Click Remove Print Queue.
2
Select the print queues you want to delete.
30