Intel PRO/100 - NetportExpress - Print Server Setup Manual page 33

To change a password
Select a NetportExpress print server and click the Properties button.
Click the password tab.
To set the IP address
Select a NetportExpress print server and click the Configure button.
Select TCP/IP. If the IP address does not display, you can assign an
address. If you need to request an IP address, see your Network
Administrator.
Using Web Netport Manager
You can also manage your print servers using your web browser to
connect to the Web server running on the NetportExpress print server.
To run Web Netport Manager you will need Netscape* or Microsoft
Internet Explorer*, versions 3.0 or later.
To access Web Netport Manager
1 Open your web browser.
2 Type the NetportExpress print server IP address in the Location
box and press Enter. The Web Netport Manager home page will
appear.
Note: To find out if the NetportExpress print server has an IP address,
print a test page by pressing the "diag" button on the print server. To
set an IP address, see "Setting an IP Address" on pages 15 and 20.
31