Intel PRO/100 - NetportExpress - Print Server Setup Manual page 27

4 Go to the shell prompt and create a spool directory for the printer,
if the directory doesn't already exist. To do this, type the follow-
ing commands:
mkdir spool_directory
chown daemon spool_directory
chgrp daemon spool_directory
chmod 775 spool_directory
where:
spool_directory is specified in the /etc/printcap file by the
sd= option.
(Example: /usr/spool/lpd/lj3ps)
5 Enable queuing for the printer by typing the following command:
lpc enable printer
where:
printer is the local printer specified in the /etc/printcap file (for
example: lj3ps )
6 Enable printing by typing the following command:
lpc start printer
where:
PRINTER is the local printer specified in the /etc/printcap file
(lj3ps in the printcap sample)
7 Test the configuration by typing:
ping host
lpr -P printer file
where:
host is the name of the NetportExpress print server as it appears
in the /etc/hosts file.
printer is the name of the printer queue.
file is the name of a file.
25