Related Manuals for Rockford Fosgate PUNCH 60.2
Summarization of Contents
Introduction
Punch Amplifier Accessory Pack
Details the included hardware and components in the amplifier's accessory pack.
Technical Design Features
TRANS•ANA
Explains the low-voltage preamp circuit for clear, real sound reproduction at high volumes.
TOPAZ (Tracking Operation Pre-Amplifier Zone)
Describes the unique ground circuit that eliminates noise problems in car audio systems.
DSM (Discrete Surface Mount) Technology
Details the manufacturing process combining discrete and integrated circuitry for improved performance.
XCard (Internal Crossover)
Explains the internal active crossover card for flexible frequency adjustments.
MOSFET Devices
Discusses the advantages of MOSFETs in power and output stages for thermal stability and linearity.
NOMAD (Non-Multiplying Advanced Decision)
Describes the analog computer process for precise output power control and protection.
Punch EQ
Details the equalization controls for correcting acoustical deficiencies and enhancing sound.
Design Features
Cast Aluminum Heatsink
Highlights the heatsink design for efficient heat dissipation and improved cooling.
End Caps
Describes the end caps that conceal wiring and input cables for a clean look.
Speaker Terminals
Details the heavy-duty, gold-plated terminal blocks for speaker connections.
Power Terminals
Describes the gold-plated terminals for power and ground connections.
REM Terminal
Explains the gold-plated spade terminal for auto power/remote turn-on.
RCA Input Jacks
Details the industry-standard RCA jacks for signal level input.
Input Sensitivity Controls
Explains input level controls preset to match source unit outputs.
Punch Equalization Controls
Details the bass and treble controls for correcting listening environment deficiencies.
LED Power Indicator
Describes the LED that illuminates when the unit is turned on.
Mounting Location
Trunk Mounting
Provides guidance on mounting the amplifier vertically in the trunk for optimal cooling.
Passenger Compartment Mounting
Offers advice on mounting in the passenger area, ensuring adequate airflow.
Engine Compartment Mounting
States that mounting in the engine compartment is not recommended and voids the warranty.
INSTALLATION
Power Connections
Details the connections for power, remote turn-on, and ground to the amplifier.
Stereo Operation
Diagram and explanation for connecting speakers and setting gains for stereo mode.
Mono Operation
Diagram and explanation for connecting speakers and setting gains for mono mode.
Stereo/Mono Operation
Diagram and explanation for connecting speakers and settings for combined stereo/mono modes.
System Diagrams
2-Way System
Illustrates a typical 2-way speaker system wiring configuration.
3-Way System
Illustrates a typical 3-way speaker system wiring configuration.
4-Way System
Illustrates a typical 4-way speaker system wiring configuration.
4-Way System w/Fadable Rear Stage
Illustrates a 4-way system with a fadable rear stage wiring configuration.
Rockford Fosgate Accessories
Energy Storage Capacitors
Explains the use and benefits of energy storage capacitors for amplifiers.
Dynamic Power Measurements
Information Cubed
Explains the 3-dimensional PowerCube graph used for testing amplifier performance.
Need help?
Do you have a question about the PUNCH 60.2 and is the answer not in the manual?
Questions and answers