Download Print this page
Panamax M5300-PM Specifications

Panamax M5300-PM Specifications

Datasheet
Hide thumbs Also See for M5300-PM:

Advertisement

Quick Links

LOOKING FOR CRYSTAL CLEAR PICTURE AND SOUND?
Clean Power Level 4
Improves picture and sound quality by
eliminating noise across the entire AC
bandwidth. 40% more efficient at eliminating
noise than Clean Power Level 3.
AVM (Automatic Voltage Monitoring)
Protects equipment against prolonged over/
under voltages by disconnecting the power
and reconnecting it when safe power returns.
High Current Outlets
2 outlets for equipment with high power
demands (Amps/Subwoofers).
USB Charger
Convenience charger for mp3 players, cell
phones, and other small electronics.
Gaming LAN Port
Easy access to LAN port on front panel.
Perfect for online gaming.
5 Isolated Outlet Banks
Isolating outlet banks from one another
prevents noise contamination between
components.
12 Volt Trigger
Allows source equipment to activate or
deactivate the outlets on the M5300-PM.
Power Sequencing
Guards against blown fuses and potentially
damaging speaker thump by automatically
powering outlets on and off in sequence.
11 Outlets
5 Always On, 4 Switched, 2 Switched High
Current.
M5300-PM
HOME THEATER POWER MANAGEMENT
1
Improves Picture and Sound Quality
Level 4 Power Cleaning and Filtration eliminates
common symptoms of contaminated power (including
loss of detail, pops, hisses, hums and visual artifacts)
and allows your A/V equipment to perform up to its full
capability.
2
Monitors Incoming Line Voltage and Provides a
Visual Indication of Power Level
Panamax's patent pending AVM™ circuitry continuously
monitors the incoming power as displayed on the digital
voltmeter. In case of an undervoltage or an overvoltage, a
flashing red lightning bolt will be displayed in the voltmeter,
and power to the connected equipment is automatically
turned off if either of these conditions is detected. When
voltage returns to a safe level, power to the equipment is
automatically reconnected.
3
Reduces Cross-Contamination Between Components
The M5300-PM is designed to provide noise isolation
between 5 isolated outlet banks (including 1 bank with 2
high current outlets) so that any noise created by an A/V
component cannot contaminate the power going to equip-
ment plugged into another outlet bank.
www.panamax.com

Advertisement

loading

Summary of Contents for Panamax M5300-PM

  • Page 1 12 Volt Trigger Reduces Cross-Contamination Between Components Allows source equipment to activate or The M5300-PM is designed to provide noise isolation deactivate the outlets on the M5300-PM. between 5 isolated outlet banks (including 1 bank with 2 high current outlets) so that any noise created by an A/V •...
  • Page 2 5 00 50616 00816 2 4.1” H with feet 1690 Corporate Circle, Petaluma, CA. 94954 • 800-472-5555 • 707-283-5900 • Fax 707-283-5901 • www.panamax.com © 2009 Panamax, Inc. Panamax, MAX, and the Panamax logo are registered US trademarks of Panamax L590 REV. D 12/09...