LG 42PX3DCV - Plasma Panel With TV Tuner Owner's Manual page 32

Operation
° Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format.
When you receive _ anaEog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be dis-
p_ayed.
ff you are viewing a picture with a 16:9 aspect ratio, you can't use the Horizon aspect ratio option.
- Horizon asped ratio is not avaiJable for Component 1-2(4.SO£/720p/1080i)/RGB_DTV (480pf720p/1080i)iHDMI/DVkDTV (720p/1080i)
/DTV(72Op/t 080i) input source.
_n RGB-PCiDVt-PC input soutce_ only use 4:3 or 16:9 aspect ratio are avaBabte.
Note," if a fixed image is displayed on the sereen for a long time, it image may b_.come imprinted on the scr_n and remain visi-
ble,
1. Press the RATIO button repeatedly to select the _sired picture format
You can also adjust As_ Ratio in the OPTION menu.
- Set By I_togtam
Setect the proper picture proportion to n_tch the source's image, (4:3 -_ 4:3, 16:9 -e 16:9)
,4_3
Choose 4_3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both
the teft and right sides
"l&9
Choose 16_9 _en you want to adjust the picture horizontal_y_ in a linear proportjon to fill the entire screen
* Horizon
Choose Hot|zon when you want to adjust the picture in a non4inear proportion, that is_ more enlarged at both
sides, to create a spectacular view,
* _om I
Choose
Zoom
I when you want to view the picture without any alteration, However, the top and bottom p,oCdons
of the picture will be cropped.
* Zoom
2
Choose
Zoom
2 when you want the picture to ba a_tered, both vertically extended and cropp_. The picture tak _
ing a haffway trade off between alteration and screen coverage,
* Cinema Zoom
Choose
C_ema Zoom
when you want to enlarge the picture in correct propo_on. Note: When enlarging or
reducing tt'_ picture size, the image may become distorted.
You can adjust the enlarge proportion of Cinema Zoom using A / V button. The adiustn_nt range is 1 _16,
- Most movies are 24 frames/see, but TV signal is 30 frames/sec.
This option lets the TV do 3:2 puIFdown operation for you to watch
movies at the best motion appearance.
1, Press the MENU button and then use A/V button to select the OPTION menu.
2. Press the I_ button and then use A _V button to select Ctr_m3 _.
3 Press the ll_ _n and then use A/V button to select _or On,
4. Press EXIT button to return to TV viewing or press; MENU batten to return to the
previous menu.
Note: T,_is feature operates only in Component 480i, S.Video, Video mode,
32 Plasma TV