LG 42PX3DCV - Plasma Panel With TV Tuner Owner's Manual page 14

Installation
3, Analog and Digital; TV signals provided on cable and antenna
Antenna Bronze Wire
___ RF Coaxial W!re (75 ohm)
....... i
Cable TV Wall Turn c[ockw_e te tighten.
Jack RF Coaxial Wire (75 ohm)
Bronze Wire
_iiiiii!iiiiii!!ii_i_iiiiiiiiiiiii
• To improve the picture quality in a poor signal area,
p_ease purchase a signaJ ampBfier and install property.
• If the antenna needs to be splff for two TV's, install a "2-
Way Signal Sp_itteP in the connections.
. [f the ar4enna is not insf_3[led properly, contact your deal-
er for assis_nce.
- To avoid picture noise (interference), leave an adequate dis_nce between the VCR and TV
- Use the _SM Method (on the Option menu) feature to avoid having a fixed image remain on the screen fern tong period of tjrrre_
[f the 4::3 picture format is used; the fixed images on the sides of the screen may remain visibie on the screen.
Connection Option 1
Set VCR output switch to charmer 3 or 4 and
then tune the TV to the same channe_ number_
Connection Option 2
1, Connect the audio and video cables from the
VCR's output jacks to the FV input jacks, as
shown in the figure,
When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
[f you connect an S-WDEO output from VCR to
the S-V[DEO input the picture quality is
improved; compared to connecting a regular
VCR to the Video input.
2, Insert a video tape into the VCR and press
PLAY on the VCR, (Refer to the VCR owner's
manua4,)
& Select the input source with using the
TV/VIDEO button on the remote control Note
that this TV finds the connected input sources
automatically for Video, Front Video and
Com_nent 1-2_ _t is presumed that RGB and
HDMt/DVI sources are connected
Do not connect to both Video and
S-Video at the same t_me_
[] []
VCR Rear
t4 Plasma TV