Checking The Xm Signal Strength And Radio Id; Channel Selection; Category Search; Direct Access Of Channels - Denon S-81 Operating Instructions Manual

Listening to radio broadcasts
¢ A Warning Against Reverse Engineering
It is prohibited to copy, decompile, disassemble, reverse engineer,
or manipulate any technology incorporated in receivers compatible
with the XM Satellite Radio system.
Furthermore, the AMBE ® voice compression software included in
this product is protected by intellectual property rights including
patent rights, copyrights, and trade secrets of Digital Voice
Systems, Inc. The user of this or any other software contained in
an XM Radio is explicitly prohibited from attempting to copy,
decompile, reverse engineer, or disassemble the object code, or in
any other way convert the object code into human-readable form.
The software is licensed solely for use within this product.
Hardware and required $12.95 monthly service subscription sold
separately. Other fees and taxes, including a one-time activation
fee may apply. Subscription fee is consumer only. All fees and
programming subject to change. Channels with frequent explicit
language are indicated with an XL. Channel blocking is available for
XM radio receivers by calling 1-800-XMRADIO. Subscriptions subject
to Customer Agreement available at xmradio.com. XM service only
available in the 48 contiguous United States. ©2006 XM Satellite
Radio Inc. All rights reserved.

Checking the XM signal strength and Radio ID

1 < FUNCTION >
[TUNER] FUNCTION
Use or (
"TUNER".
2
BAND
Press to select "XM".
• The reception channel number is displayed.
3
[TIME/DISPLAY]
Press until "SIGNAL" is displayed.
• The display changes as shown below according to the
receiving condition.
Display Condition
GOOD Signal strength is good
MARGINAL Signal strength is marginal
WEAK Signal strength is poor
NO Loss of the signal
4
Adjust the antenna location until "SIGNAL:GOOD"
is displayed.
5
[TIME/DISPLAY]
Press
(ex.CH001) is displayed.
6 [ ]
Press to select channel 0 (XM000).
6
XM000 RADIO ID

Channel selection

< FUNCTION >
1
Use or
"TUNER".
2
BAND
Press to select "XM".
• The reception channel number is displayed.
XM040 DeepTrks
CH040
3 [ ] [
Press 6 or 7
The channel changes continuously when you press and hold
) to select
[SEARCH].

Category search

1 [F F G G ]
Press in the XM mode.
• The current category name is displayed.
XM040 DeepTrks
CATEGORY SEARCH
XM040 DeepTrks
CAT: Rock
[F F G G ]
2
Use to select the category, and press
select the channel within the selected category.
until the XM channel
1
2
Radio ID
[TUNER] FUNCTION
( ) to select
Channel name
Channel number
3
]
to reach the desired channel.
• "LOADING" is displayed while receiving the channel or information.
• "UPDATING" is displayed while updating encryption code.
• When the selected channel is not available, "CH– – –" is displayed.
• Information on the artist name, song title, category and signal level
can be checked using [TIME/DISPLAY].
• The XM Satellite Radio channels can be preset in the same way as
AM/FM band (
Channel Category
[D D H H ]
to
17
ENGLISH
Listening to radio broadcasts

Direct access of channels

[XM]
Press .
[NUMBER]
Press .
For example, if you want to access channel 123 (ex.CH123) press
[NUMBER] as shown below.
XM
CH001
XM
CH012
XM
CH123
(Remote control unit)
Once all number have been
[ENTER/MEMO]
to change the channel.
If the next [NUMBER] is not pressed within several seconds, the
channel automatically switches to the channel number that was
input.
page 15).
ENGLISH
input, press