Picture Menu - Hitachi 42EDT41 - 42" Plasma TV User Manual

OPERATING INSTRUCTIONS (continued)

PICTURE MENU

MENU
Selected characters
Narrows the gap between
Contrast
brightness and darkness.
Black is subdued for
Brightness
increased overall darkness.
Color
Darkens colors.
Enhances red and weakens
Tint
green.
Picture Enhancement
Cool
Color Temperature
Color Temp. Adjustment
Amplitude
Brighter scene is decreased in
Red
reddish color.
Brighter scene is decreased in
Green
greenish color.
Brighter scene is decreased in
Blue
bluish color.
Cut Off
Dark scene is decreased in
Red
reddish color.
Dark scene is decreased in
Green
greenish color.
Dark scene is decreased in
Blue
bluish color.
Reset
(off the function)
OK
Broadens the gap between
brightness and darkness.
Black is set off for increased
overall brightness.
Lightens colors.
Enhances green and weakens
red.
Off Low Middle
Normal Warm Black / White
Off On
Brighter scene is increased in
reddish color.
Brighter scene is increased in
greenish color.
Brighter scene is increased in
bluish color.
Dark scene is increased in
reddish color.
Dark scene is increased in
greenish color.
Dark scene is increased in
bluish color.
(waiting to reset)
CH+
CH-
CH+
CH-
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding
button at [+31]. The color for [+32] to [+40] numbers will change from
white to magenta. This special mode is better for dark scenes.
For brighter scene some parts of the picture might not be clear. We
recommend to set at [+31].
"Panel Life" in the Function Menu should be set to Normal when
Contrast setting is adjusted.
Adjust to taste.
Adjust to taste.
This is not available to adjust when receiving PAL/SECAM signal.
In this case the character will be grayed out.
Adjust for most realistic skin color.
High
Sets the clarity of small details to the desired level.
Normally set to Normal.
Turn On when you wish to change color temperature depending on
the user's preference.
Adjust color temperature depending on the user's preference. These
settings are independently stored in each of the 4 Color Temperature
modes.
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
OK
CH+
CH-
OK
OK
Setup hint
cursor