Hitachi 32HDT20 Operating Manual page 47

AUDIO
Advanced
Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.
Settings
Audio
Treble
Bass
Balance
Sound Enhancement
Advanced Settings
Move Select
SEL
Press THUMB STICK ,
function has a "•" in the circle or a check ( ) in the box, it is ON.
Audio Source
Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving
a weak stereo broadcast or 2nd Audio Prog (SAP) which may be a secondary language, weather report, etc.
The sources received will be displayed at the top left edge of the TV. The source you select will be displayed above the sources
received. See example below for each selection when both stereo and second audio are received (monaural is always received).
STEREO SELECTED
STEREO
ST/SA
Internal Speaker
This function is useful when setting up the external speakers. If you prefer to use only speakers from a separate stereo system, turn
this feature OFF. When set to OFF, the Plasma TV speakers and the sub-woofer output are OFF.
Auto Noise Cancel
This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will automatically eliminate the audio
for that channel.
Perfect Volume
This function will automatically adjust volume so each channel and input has the same average volume level.
50%
50%
L R
, , to highlight a function. Press down on the THUMB STICK to select the function setting. When the
ANT A 31
NEWS
10:00 PM
Audio
Advanced Settings
Audio Source
Stereo
THUMB
STICK
Internal Speakers
ON
SELECT
Auto Noise Cancel
Perfect Volume
Move
SAP SELECTED
ANT A 31
SAP
NEWS
ST/SA
10:00 PM
47
Mono 2nd Audio Prog.
Off
Return
SEL
MONO SELECTED
MONO ANT A 31
NEWS
10:00 PM