Related Manuals for Pego ES6-M
Summarization of Contents
1. INTRODUCTION
1.1 GENERAL
General overview of PEGO EASYSTEAM sunk-electrode humidifiers, their features, and advantages.
1.2 WARRANTY
Details the warranty coverage, exclusions, and terms for PEGO EASYSTEAM humidifiers.
1.3 OPERATING PRINCIPLE
Explains how PEGO EASYSTEAM humidifiers produce steam using sunk-electrode technology and automatic control.
1.4 ES SERIES HUMIDIFIER ID CODES
Lists and describes the identification codes for different models within the ES series.
1.5 ES SERIES HUMIDIFIERS TECHNICAL DATA
Presents detailed technical specifications and operating conditions for various ES series humidifier models.
1.6 OEM SERIES HUMIDIFIER ID CODES
Lists and describes the identification codes for different models within the OEM series.
1.7 OEM SERIES HUMIDIFIERS TECHNICAL DATA
Presents detailed technical specifications and operating conditions for various OEM series humidifier models.
1.8 OVERALL DIMENSIONS
Provides overall dimensions for ES and OEM series humidifiers with diagrams and tables.
1.9 IDENTIFICATION DATA
Explains the ID plate on the unit and the data it contains for identification.
1.10 STANDARD ASSEMBLY KIT
Lists the standard components included with EASYSTEAM humidifiers and electronic kits.
2. INSTALLATION
2.1 IMPORTANT INFORMATION FOR THE INSTALLER
Provides crucial safety and general guidelines for installers before performing humidifier installation.
2.2 INSTALLING THE ES SERIES HUMIDIFIER
Step-by-step instructions for physically installing the ES series humidifier to a wall.
2.3 ES SERIES HUMIDIFIER ELECTRICAL POWER CONNECTIONS AND SECURITY
Details electrical power connections, grounding, and safety measures for ES series humidifiers.
2.4 ES AND OEM SERIES CONTROL SIGNALS AND SENSORS CONNECTIONS
Explains how to connect control signals and sensors for ES and OEM series humidifiers.
2.5 WIRING DIAGRAMS ES AND OEM SERIES
Provides wiring diagrams for ES and OEM series humidifier models.
2.6 INSTALLING THE OEM SERIES HUMIDIFIER
Step-by-step instructions for physically installing the OEM series humidifier.
2.7 OEM SERIES ELECTRICAL HUMIDIFIER CONNECTION
Explains that OEM series electrical connections are the same as detailed in paragraphs 2.3, 2.4, 2.5.
3. PROGRAMMING
3.1 DESCRIPTION OF SLIM CONTROLLER
Details the SLIM CONTROLLER, its display, and the functions of its 8 LEDs and 6 keys.
3.2 LEVEL 1 PROGRAMMING
Explains Level 1 programming for modifying proportional band (Bp) and steam production percentage (Pr).
3.3 LEVEL 2 PROGRAMMING
Details advanced humidifier settings in Level 2 programming, advising professional guidance.
4. MASTER SLAVE CONFIGURATION
4.1 SINGLE HUMIDIFIER CONFIGURATION (default configuration)
Describes the default single humidifier setting (MS=0) and its autonomous operation.
4.2 MASTER + SLAVE HUMIDIFIERS CONFIGURATION
Explains how to configure humidifiers in a Master/Slave setup for coordinated steam production.
5. SWITCHING ON THE HUMIDIFIER
5.1 INITIAL START-UP
Guides through the initial start-up procedure, including checks and powering up the humidifier.
5.2 STEAM PRODUCTION
Details how to set humidity and achieve steam production after initial start-up.
6. TROUBLESHOOTING
TROUBLESHOOTING
Lists common faults, their causes, and recommended tasks to resolve issues with EASYSTEAM humidifiers.
7. MAINTENANCE
7.1 MAINTENANCE
Overview of necessary maintenance operations for safety, correct functioning, and optimal output.
7.2 GENERAL SAFETY RULES
Provides essential safety rules that must be followed exclusively by experienced and qualified technical staff during maintenance.
7.3 MAINTENANCE INTERVALS
Outlines suggested maintenance operations and their frequencies, adaptable based on water quality.
7.4 CHANGING THE CYLINDER
Step-by-step guide on how to replace the worn electrode cylinder in EASYSTEAM humidifiers.
7.5 CLEANING THR CYLINDER
Instructions for cleaning the cylinder, electrodes, and filter slits to remove incrustations and deposits.
8. STEAM DISTRIBUTION
8.1 GENERAL
Discusses the key factors for good steam distribution and desired humidity levels in any environment.
8.2 EXAMPLE OF IN-DUCT STEAM DISTRIBUTION
Illustrates the correct method for inserting a PEGO distribution lance into an air duct for optimal steam distribution.
8.3 EXAMPLE OF IN-ROOM STEAM DISTRIBUTION
Shows how to position a PEGO distribution lance in front of ventilation unit outlets for effective in-room steam distribution.
8.4 CHOOSING THE DISTRIBUTION PIPE
Provides a table listing various distribution pipe codes, total lengths, and diameters for selection.
8.5 CONDENSATE RECOVERY
Explains how to manage condensation generated in the distribution lance and installation of condensate recovery devices.
9. APPENDICES
9.1 EC DECLARATION OF CONFORMITY
States that the PEGO product conforms to relevant European directives and harmonized standards.
9.2 ES SERIES EXPLODED VIEW
Presents an exploded view diagram of the ES series humidifier with numbered parts for identification.
ES SERIES SPARE PARTS LIST
Lists spare parts for the ES series humidifiers, including codes, descriptions, and references.
9.3 OEM SERIES EXPLODED VIEW
Provides an exploded view diagram of the OEM series humidifier with numbered parts for identification.
OEM SERIES SPARE PARTS LIST
Lists spare parts for the OEM series humidifiers, including codes, descriptions, and references.
Need help?
Do you have a question about the ES6-M and is the answer not in the manual?
Questions and answers