Denon ASD-51W Owner's Manual page 43

GNETH
Symptom
Internet radio cannot be • Ethernet cable is not properly connected or network is
played. disconnected.
• Program is being broadcast in non-compatible format.
• The computer's or router's firewall is activated.
• Radio station is not currently broadcasting.
• IP address is wrong.
Files stored on a • Files are stored in a non-compatible format.
computer cannot be • You are attempting to play a file that is copyright
played. protected.
• Computer's power is not turned on.
Server is not found, • The computer's or router's firewall is activated.
or it is not possible to • Computer's power is not turned on.
connect to the server. • Server is not running.
• Set's IP address is wrong.
Cannot connect to preset • Radio station is not currently broadcasting.
or favorite radio stations. • Radio station is not currently in service.
RESET
• The
• Firmware has been updated.
For some radio stations • Station is congested or not currently broadcasting.
cannot be connected to.
Sound is broken during • Network's signal transfer speed is slow or communications
playback. lines or radio station is congested.
Sound quality is poor or • File being played has a low bit rate.
played sound is noisy. • Equalizer settings are configured in the iPod.
Cause
button was pressed.
Countermeasure
• Check the connection status.
• Only Internet radio programs in MP3 and WMA can be
played on this set.
• Check the computer's or router's firewall settings.
• Choose a radio station that is currently broadcasting.
• Check the set's IP address.
• Record in a compatible format.
• Files that are copyright protected cannot be played on this
set.
• Turn on the power.
• Check the computer's or router's firewall settings.
• Turn on the power.
• Launch the server.
• Check the set's IP address.
• Wait a while before trying again.
• It is not possible to connect to radio stations that are no
longer in service.
RESET
• When the button is pressed, the settings are
initialized and are restored to the default settings.
• When the firmware has been updated return to default
factory settings.
• Wait a while before trying again.
• This is not a malfunction. When playing broadcast data with
a high bit rate, the sound may be broken, depending on the
communications conditions.
• This is not a malfunction.
• Release the iPod equalizer settings.
ENGLISH
Page
7
21
–
–
–
21
21
–
–
–
–
–
–
–
–
17
–
–
–
–