Denon ASD-51W Owner's Manual page 25

Setting items
ON : Enable Party Mode function.
Party Mode
Function OFF : Disable Party Mode function.
Set the Party Mode
Refer to page 30, "Playing the Same Network
function.
Audio on Different Devices Connected in a Network
(Party Mode Function)" for more information on the party
mode function.
Party Start Level Volume Level
Make settings for • 0 ~ 100 % : Start party mode with your preferred volume.
volume level when
This can be set when "Party Mode Function" is set
the Party Mode is
to "ON".
started.
Check for Update : You can update to the latest firmware
Firmware Update
Update the firmware. by connecting the ASD-51W to a network.
It is recommended that you update to the latest firmware
version when using the ASD-51W.
NOTE
When you update the firmware your settings will be
returned to the default values. Please be aware that
updating the firmware will erase all your settings,
including the stations registered in your Favourites
and your Recently Played list.
GHow to update the firmwareH
1. Connect the monitor and connect to the network.
(vpage 6)
2. Turn on the ASD-51W (vpage 4, 6 b1 ).
3. Configure the network connection settings.
(vpage 7)
Setting contents Setting items
Firmware Update
4. While watching the GUI screen, use
(Continued)
select "Setup" – "Other" – "Firmware Update" .
When the language setting is "English".
b
5. Select "Start" and press
• When you press
automatically.
• The message "Now Updating. During this process
screen will go blank for several minutes. Do not turn
off." will appear briefly, after which the GUI screen
will go blank.
• During firmware updating, the power indicator is
turned off and the GUI screen is blank.
• The updating process takes approx. 10 ~ 15 minutes
with a broadband connection. The actual time will vary
depending on the server status and the speed of the
Internet.
• When updating is complete, the GUI screen reappears
automatically.
• Set the power operation switch on the ASD-51W to
"OFF" . Firmware updating is now complete.
NOTE
Step 5 cannot take place if the ASD-51W does not
connect to the Internet. In this case, repeat the procedure
from step 2.
If your ASD-51W already has the latest firmware
version, the message "Latest Firmware" will appear
at step 5. In this case, you do not need to update the
firmware.
ENGLISH
Making Detailed Settings (Setup)
Setting contents
uio p to
ENTER
.
ENTER
, firmware updating starts