Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Breezair TBS
Summarization of Contents
Safety Instructions
Employer and Employee Responsibilities
Outlines installer responsibilities for Occupational Health and Safety compliance.
General Safety Precautions
Essential safety measures to prevent fire, shock, and injury during installation and use.
Risk Assessment for Installers
Emphasizes the legal requirement for risk assessment before starting hazardous tasks.
Important Installation Requirements
Critical installation guidelines covering structural integrity, material handling, and regulatory compliance.
Quick Guide: Installation Steps
Cooler Location and Conveyance
Covers selecting the site and conveying the unit to the roof for installation.
Dropper and Cooler Mounting
Covers preparing, mounting the dropper, and then mounting the cooler onto it.
Electrical and Cable Installation
Guides on cable routing, termination, and electrical connections.
Final Steps and Customer Handover
Details final checks, site cleanup, and customer handover procedures.
Cooler Location
Removing the Venturi
Details the process of detaching the venturi and fan assembly from the unit.
Removing the Transition
Explains how to disengage and remove the transition piece from the cooler.
Dropper and Transition Installation
Preparing the Dropper
Instructions for preparing the dropper duct, ensuring correct edge finish and flange.
Mounting the Dropper
Guides on securely fixing the dropper to the roof structure, ensuring level and square placement.
Securing the Dropper & Transition
Details fitting the transition onto the dropper and ensuring it is level and securely fastened.
Weather Damper and Cooler Conveyance
Weather Damper Operation
Instructions for breaking clips and ensuring the weather damper operates freely.
Conveying Cooler to Roof
Provides safety cautions and methods for safely moving the cooler to the installation site.
Cooler Mounting and Cable Installation
Mounting the Cooler
Guides on lifting and placing the cooler assembly onto the transition, ensuring correct engagement.
Cable Installation and Termination
Guides for routing power/control cables, connecting to junction boxes, and local wiring rules.
Electrical and Water Requirements
Electrical Requirements
Details required electrical supply specifications and compliance with local regulations.
Water Requirements
Specifies water connection details, pressure, flow, and temperature requirements.
Field Wiring Diagram
Illustrates the wiring connections between the electronics module and power supply.
Water Management Systems
Installing the Drain Valve
Provides step-by-step instructions for assembling and installing the drain valve.
Installing the Water Sensor
Guides on clipping the water sensor to the tank and routing its cable.
Installing the Bleed Funnel Alternative
Details the installation of the bleed funnel as an alternative to the drain valve.
Solenoid and Float Valve Installation
Installing the Inlet Solenoid
Instructions for screwing the solenoid valve into the extension tube and connecting its cable.
Installing the Float Valve
Guides on assembling the float valve, ensuring correct placement and unrestricted movement.
Mains Water Connection
Details how to connect the main water supply, including adaptor fittings and shut-off valves.
Electrical Connections
Connect Sensor, Solenoid, Drain Valve
Connects water sensor, solenoid, and drain valve cables to the electronics module.
Connecting the Water Pump
Guides on routing the pump cord and connecting the pump plug after water level is set.
MagIQtouch Controller Connection
Connecting the MagIQtouch Controller
Instructions for connecting the MagIQtouch Controller wall cable to the electronics module.
Controller Display Information
Explains how to view diagnosis and operating information on the MagIQtouch Controller screen.
Setting the Water Level
Guides on adjusting the float valve to achieve the correct water level in the tank.
Setup for Bleed Funnel
Explains settings for the bleed funnel option, including 'NO DRAIN CONTROL'.
Fault Codes and Cooler Commissioning
Fault Codes on Electronics Module
Lists fault codes and their meanings indicated by LEDs on the electronics module.
Test Operation and Pump Testing
Covers testing the cooler's operation and the water pump functionality.
Testing the Drain Valve
Guides on testing the drain valve functionality using the controller's manual drain option.
Commissioning Completion Checklist
Checklist Verification
Covers verification of cooler, ductwork, plumbing, electrical, and safety aspects.
Final Test and Customer Handover
Ensures final verification and proper handover procedures are completed.
Cleanup and Final Check
Covers site cleanup and final inspection of water saturation and leaks.
Adjusting Cooler Settings
Key Cooler Settings
Details settings like Pre-wet, Salinity, Autostart, Water Manager, and Weather Seal Open Speed.
Appliance Information and Modes
Covers appliance details, night quiet mode, manual drain, pad flush, and drain/dry modes.
Troubleshooting Common Issues
Inadequate Cooling and Noise Issues
Addresses causes and solutions for poor cooling performance and cooler noise.
Pump and Fan Operation Problems
Troubleshoots issues related to pump failure, fan startup, and water circulation.
Water Overflow and Odor Issues
Covers causes and fixes for continuous water overflow and unpleasant odors.
Need help?
Do you have a question about the TBS and is the answer not in the manual?
Questions and answers