Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IRIS 316
Summarization of Contents
Introduction and Overview
1.01 Introduction
Explains the IRIS216/316 Thermal Imaging PTZ cameras and their capabilities in low light conditions.
1.02 Manual Validity
Details the validity and scope of the manual, including product installation and operation guidelines.
1.03 Detection Ranges
Provides detection ranges for humans and vessels based on NATO criteria, varying by model.
1.04 Conventions
Explains the use of icons for warnings, information, and danger throughout the guide for user safety.
1.05 Important Warranty Information
Outlines warranty terms and the process for registering the product for extended warranty coverage.
Camera Control Data and Cabling
4.01 Camera Control Data
Explains the RS485 serial data connection and Pelco-D protocol used for controlling the cameras.
4.02 Cabling Requirements
Details the camera's cable requirements, including video, power, and data connections, and CAT5 usage.
4.03 Setting Camera Address
Explains how to set a unique address for each camera using DIP switches for proper control.
4.04 Installation Considerations
Discusses important factors to consider before camera installation, such as position and cable routing.
4.05 Protocol Information
Specifies the default baud rate and Pelco-D protocol, and mentions Iris-specific commands.
Hardware Installation
5.01 Hardware Installation
Details the physical components of the camera and the process of mounting it using the fixing plate.
Connections and Powering Up
6.01 Connections
Illustrates the camera's umbilical and breakout cable connections for video, power, and data.
6.02 Video Connections
Explains video output, connector types, and compatibility with MFDs/Chart Plotters.
6.03 Data Connections
Provides instructions for connecting RS485 serial data wires, emphasizing polarity and avoiding power sources.
6.04 Powering Up
Describes the camera's initialization routine, calibration process, and readiness indicators after power-on.
Camera Control and Features
7.01 Controlling the Camera
Details how to control camera functions like Pan, Tilt, Zoom, and Set Home Position using controllers.
Set-Up Features
Covers initial setup features like Video Standard, Video Orientation, and Set Home Position.
Proportional Speed Control
Explains the proportional speed function for accurate pan/tilt control based on zoom level.
Auto-Flip
Describes the Auto-Flip feature that automatically corrects camera orientation after tilting past azimuth.
Extended Features
Lists and explains extended features like Colour Palette Select, Scene Modes, and Video Pause.
User Presets, Tours, and Scans
User Presets
Explains how to store and recall up to 100 user-defined positions for quick camera aiming.
System Presets
Mentions system presets for functions not covered by the Pelco-D Protocol.
Scan Modes
Describes the four available scan modes: 45°, 90°, 180°, and 360° Auto Scan.
Tours
Explains how to link user presets into tours for sequential camera movement with dwell times.
Protocol Command List
8.01 Protocol Command List
Lists specific commands for IRIS216/316 Thermal Cameras not covered by the standard Pelco-D protocol.
Camera Address Table
9.01 Camera Address Table
Provides a table for setting unique camera addresses using DIP switch Bank 1.
Specifications
Specifications
Presents detailed technical specifications for IRIS216 and IRIS316 Thermal Imaging PTZ cameras.
Contact Information
Iris Innovations Limited (UK)
Provides contact details for Iris Innovations Limited in the UK.
Iris Innovations Limited (USA)
Provides contact details for Iris Innovations Limited in the USA.
Need help?
Do you have a question about the 316 and is the answer not in the manual?
Questions and answers