Related Manuals for HP J9662A
Summarization of Contents
1 Introducing the Switch
Front of the Switch
Details the front panel layout and LEDs of the HP V1410 switch series.
Network Ports
Describes the auto-sensing 10/100Base-TX and 10/100/1000Base-T ports.
LEDs
Explains the function of the Power, Link/Act, and Spd LEDs for monitoring.
Back of the Switch
Shows the back panel layout of the switches, including the power connector.
Power Connector
Details the DC power connector, its input requirements, and auto-adjustment capabilities.
Switch Features
Lists the key features of the HP V1410 switch series, such as Auto-MDIX and QoS.
2 Installing the Switch
Included Parts
Lists the components included with the switches, such as documentation and mounting kits.
Installation Precautions
Provides warnings and cautions for safe installation of the switches in various environments.
Installation Procedures
Summarizes the steps for installing the switch, including site prep, verification, and connection.
Mount the Switch
Details methods for mounting the switch, including rack, wall, and surface options.
Connect the Switch to a Power Source
Explains how to connect the switch to a power source and check LEDs during initialization.
Connect the Network Cables
Describes how to connect network cables to the switch ports and verify link status.
Sample Network Topologies
Illustrates common network configurations using the switches in desktop and segment scenarios.
3 Troubleshooting
Basic Troubleshooting Tips
Provides initial steps and common issues for troubleshooting switch problems like connectivity.
Diagnosing with the LEDs
Explains how to interpret LED patterns for diagnosing switch operational issues.
Hardware Diagnostic Tests
Describes methods for testing the switch and cabling through hardware diagnostics like resetting.
HP Customer Support Services
Provides information on obtaining support from HP and preparing for calls with necessary details.
A Specifications
Switch Specifications
Details the physical, electrical, environmental, BTU, acoustics, and safety specifications of the switch models.
Cabling and Technology Information Specifications
Outlines requirements and standards for network cabling used with the switches.
Twisted-Pair Cable/Connector Pin-Outs
Explains pin assignments and wiring rules for twisted-pair cables, including Auto-MDIX.
B EMC Regulatory Statements
Regulatory Statements
Lists compliance information for various regions and declarations for switch models.
Need help?
Do you have a question about the J9662A and is the answer not in the manual?
Questions and answers