RT-20 Universal Disc Player
SETUP MENU
Use to configure audio, video, language, and other general RT-20
parameter settings.
To access the Setup menus:
1. Press the remote control SETUP button.
2. Select SETUP using the remote control
press the
button or ENTER button.
Use the Setup Menu to configure parameters for the following sub-
menus: Language Setup, Audio Setup 1, Audio Setup 2, Video
Setup, Parental Setup and Others Setup. For more information:
•
See "Setup Menu: LANGUAGE SETUP" on page 3-3
•
See "Setup Menu: AUDIO SETUP 1" on page 3-6
•
See "Setup Menu: AUDIO SETUP 2" on page 3-16
•
See "Setup Menu: VIDEO SETUP" on page 3-18
•
See "Setup Menu: PARENTAL SETUP" on page 3-24
•
See "Setup Menu: OTHERS SETUP" on page 3-26.
The RT-20 also features a Front Panel Display menu. See "Front
Panel Display Menu" on page 3-33.
Note:
• The RT-20 is manufactured for sale in several different countries.
• Certain parameters are not available on some versions.
• Default parameter settings can differ among versions.
or
buttons, then
• The Setup menu can be opened while the RT-20 is in playback,
pause, resume, or stop mode. However, certain parameters cannot
be adjusted when some modes are activated.
• The Setup menu can be opened regardless of the format of most
loaded discs. However, certain parameters cannot be adjusted when
some disc formats are loaded.
SETUP MENU: LANGUAGE SETUP
Includes parameters that can be used to determine RT-20 on-screen
display menu, disc menu, subtitle, and audio language. The lan-
guage setup parameters are listed in the "Language Setup Parame-
ter Table" on page 3-4.
Setup
3-3
Need help?
Do you have a question about the RT-20 - REV 0 - 2-05 and is the answer not in the manual?