Learning Other Midi Patches - Lexicon MPX 200 - REV 2 Manual

MPX 200
For example, a Bank Select value of 1 followed by a
Program Change value of 57 will cause the MPX 200 to
load program 157. A Bank Select value of 2 followed by
a Program Change value of 57 will cause the MPX 200
to do nothing, because there is no program 257. A Bank
Select value of 0 followed by a Program Change value of
0 will cause the MPX 200 to do nothing, because there
is no program 0. Likewise, a Program Change message
requesting an empty location in the User Bank will be
ignored.

LEARNING OTHER MIDI PATCHES

The MPX 200 recognizes Pitch Bend, AfterTouch, and
MIDI Continuous Controllers 1 to 31 and 33 to 119 - in
addition to Program Change messages - to manipulate
the audio controls.
To Learn a Continuous Controller or other MIDI message:
1. Press Store and Tap simultaneously to enter
Learn Mode. The Store and Tap LEDs will
light to indicate Learn Mode is active, and "lrn" will
appear on the display.
2. Press the desired button (for example, Tap or
Bypass), or the Edit button to choose the desired
editable parameter.
3. Send a Program Change message or move the MIDI
controller through its full range. To use only a
fraction of the controller range, limit your movement
to the desired range. The Edit LED will flash to
indicate incoming MIDI activity.
4. Press Store to commit to the assignment.
The Store LED will flash rapidly and "Sto"
will appear on the display.
To assign another front panel control to a MIDI
controller or Program Change message, repeat steps
2 to 4.
5. Press Store and Tap simultaneously to exit Learn
Mode. The Store LED will flash rapidly to indicate
that Learn Mode is being exited.
MIDI Operation
. . . continued on page 5-4
5-3